1. bookVolume 13 (2018): Issue 1 (December 2018)
Journal Details
License
Format
Journal
eISSN
1338-7278
First Published
29 Mar 2013
Publication timeframe
2 times per year
Languages
English
access type Open Access

Structural analysis of cross-laminated timber slabs subjected to bending – state of the art

Published Online: 18 Jan 2019
Volume & Issue: Volume 13 (2018) - Issue 1 (December 2018)
Page range: 133 - 140
Journal Details
License
Format
Journal
eISSN
1338-7278
First Published
29 Mar 2013
Publication timeframe
2 times per year
Languages
English
Abstract

Compared to solid or laminated timber, the main point of the design of cross-laminated timber (CLT) is very low resistance and stiffness of the CLT cross layers. For the modeling and analyzing of the load distribution in CLT, various methods are available. The aim of this paper is to present the possible ways for load-bearing analysis of structural members subjected to uniaxial and biaxial bending in various software products and using various methods. A parametric analysis was performed with the aim to compare the results obtained by the analytical method, the model of the orthotropic slab, the grillage model and using the software based on the finite element method. The values of maximum deflection obtained by selected methods were compared. The mid-span deflection of beams subjected to uniaxial bending differs only slightly. In the case of slabs subjected to biaxial bending, more visible differences in results occurred. The simplified methods give the highest values on the safe side.

Keywords

[1] (2017). SCIA Engineer 17.1.2029 - student version [computer software]. Munich, Germany: Nemetschek.Search in Google Scholar

[2] (2016) DLUBAL RFEM 5.07.13 - student version [computer software]. Tiefenbach, Germany: Dlubal Software GmbH.Search in Google Scholar

[3] Novak, M.W., Koppelhuber, J. & Pock, K. (2014). Cross-Laminated Timber Structural Timber: Basic design and engineering principles according to Eurocode. Vienna, Austria: proHolz Austria.Search in Google Scholar

[4] Mestek, P., Kreuzinger, H. & Winter S. (2008). Design of Cross Laminated Timber (CLT). In 10th World Conference on Timber Engineering, 2-5 June 2008 (pp. 156-163). Miyazaki, Japani: Curran Associates, Inc..Search in Google Scholar

[5] Harris, R., Ringhofer A. & Schickhofer G. (2013). Focus Solid Timber Solutions - European Conference on Cross Laminated Timber (CLT). Graz, Austria: Graz University of Technology.Search in Google Scholar

[6] Demschner, T. (2016). CLTengineer: The Stora Enso CLT design software, User Manual. Stora Enso Wood Products GmbH. Ybbs a.d. Donau. Retrieved January 15, 2016, from https://calculatis.clt.info/Dokumentation/CLT-Engineer_Manual.pdf.Search in Google Scholar

[7] EN 1995-1-1. (2004). Eurocode 5: Design of Timber Structures-Part 1-1: General Rules and Rules for Buildings. European Committee for Standardization Brussels. Belgium.Search in Google Scholar

[8] K. Möhler. (1956). Über das Tragverhalten von Biegeträgern und Druckstäben mit zusammengesetzem Querschnitt und nachgiebigen Verbindungsmitteln. Habilitationsschrift, Karlsruhe, Germany.Search in Google Scholar

[9] RF-Laminate, Design of Laminate Surfaces. Program Description. Dlubal Software GmbH, Retrieved September 30, 2016, from https://www.dlubal.com/en/products/rfem-and-rstab-addon- modules/others/rf-laminate.Search in Google Scholar

[10] (2018) Caltulatis 2.15.0, Stora Enso [computer software], from https://calculatis.clt.info/.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo