<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Numerical simulations of a pile jacking were carried out. A Coupled Eulerian-Lagrangian (CEL) formulation was used to treat with large deformation problems. An Abaqus, a commercial Finite Element Method software suit, was used as a computing environment. The Mohr-Coulomb constitutive model was applied and the Coulomb model of friction was used to describe pile-soil interaction. Calculations were made for three different pile diameters. Toe and shaft unit resistances versus depth for each pile were investigated and plotted. CPT-based solutions were compared with the results of numerical simulations.</p></abstract>

Numerical simulations of a pile jacking were carried out. A Coupled Eulerian-Lagrangian (CEL) formulation was used to treat with large deformation problems. An Abaqus, a commercial Finite Element Method software suit, was used as a computing environment. The Mohr-Coulomb constitutive model was applied and the Coulomb model of friction was used to describe pile-soil interaction. Calculations were made for three different pile diameters. Toe and shaft unit resistances versus depth for each pile were investigated and plotted. CPT-based solutions were compared with the results of numerical simulations.

Numerical Estimation of the Pile Toe and Shaft Unit Resistances During the Installation Process in Sands

Department of Geotechnics, Geology and Marine Civil Engineering, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology (GUT), Gdańsk, Poland

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Numerical simulations of a pile jacking were carried out. A Coupled Eulerian-Lagrangian (CEL) formulation was used to treat with large deformation problems. An...

Numerical Estimation of the Pile Toe and Shaft Unit Resistances During the Installation Process in Sands

Published Online: Mar 27, 2015

Page range: 37 - 44

DOI: https://doi.org/10.1515/sgem-2015-0005

Keywords
Coupled Eulerian-Lagrangian (CEL), Abaqus, pile toe resistance, pile shaft resistance

© by Jakub Konkol

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Numerical Estimation of the Pile Toe and Shaft Unit Resistances During the Installation Process in Sands

Published Online: Mar 27, 2015

Page range: 37 - 44

DOI: https://doi.org/10.1515/sgem-2015-0005

KeywordsCoupled Eulerian-Lagrangian (CEL), Abaqus, pile toe resistance, pile shaft resistance

© by Jakub Konkol

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
Coupled Eulerian-Lagrangian (CEL), Abaqus, pile toe resistance, pile shaft resistance