<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The objective of the paper is to present some improvements done on the previously described electric drive elevator prototype [1]. The modern electric elevator contains both the cabin (replaced at the research laboratory by one trolley), and the counterweight (replaced by the opposite trolley which contains modular weights). Through the appropriate gearbox the connexion between the pulley and electric motors is provided. The designed load of the elevator conducts to the 4kW three-phase squirrel cage driven motor supplied by the power inverter prototype through the chain transmission. The modified experimental platform is depicted and the adequate experimental results are provided. </p></abstract>

The objective of the paper is to present some improvements done on the previously described electric drive elevator prototype [1]. The modern electric elevator contains both the cabin (replaced at the research laboratory by one trolley), and the counterweight (replaced by the opposite trolley which contains modular weights). Through the appropriate gearbox the connexion between the pulley and electric motors is provided. The designed load of the elevator conducts to the 4kW three-phase squirrel cage driven motor supplied by the power inverter prototype through the chain transmission. The modified experimental platform is depicted and the adequate experimental results are provided.

IMPROVEMENTS ON THE ELECTRIC DRIVE ELEVATOR PROTOTYPE. PART I TECHNICAL ASPECTS

The Scientific Bulletin of Electrical Engineering Faculty

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"IMPROVEMENTS ON THE ELECTRIC DRIVE ELEVATOR PROTOTYPE. PART I TECHNICAL ASPECTS"}

The objective of the paper is to present some improvements done on the previously described electric drive elevator prototype [1]. The modern electric elevator...

IMPROVEMENTS ON THE ELECTRIC DRIVE ELEVATOR PROTOTYPE. PART I TECHNICAL ASPECTS

Published Online: May 11, 2018

Page range: 44 - 48

DOI: https://doi.org/10.1515/sbeef-2017-0021

Keywords
electric lift, squirrel cage, regenerative power converter

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

IMPROVEMENTS ON THE ELECTRIC DRIVE ELEVATOR PROTOTYPE. PART I TECHNICAL ASPECTS

Published Online: May 11, 2018

Page range: 44 - 48

DOI: https://doi.org/10.1515/sbeef-2017-0021

Keywordselectric lift, squirrel cage, regenerative power converter

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Keywords
electric lift, squirrel cage, regenerative power converter