1. bookAHEAD OF PRINT
Journal Details
License
Format
Journal
eISSN
2286-2455
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
access type Open Access

Four-Axis CNC Machine with Microcontroller for Cutting Polystyrene with Hot Wire

Published Online: 06 Apr 2017
Volume & Issue: AHEAD OF PRINT
Page range: -
Journal Details
License
Format
Journal
eISSN
2286-2455
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
Abstract

Numerically controlled machines require precise control, because it is always necessary to know the placement of the effector. Control involves the use of electric motors that can be checked with precision. Therefore stepper motors are preferred. A further advance in stepper control is to incorporate a reaction mechanism for the rotor (for example, an encoder) so as communication is optimal for generating the torque, depending on the position of the rotor. This turns the motor into a servo mechanism with very high torque and very good position resolution. An advance in this technique is to operate the motor in a closed loop only if the error of rotor positioning becomes too high. This will allow the system to avoid oscillation while searching for a position, a problem that commonly occurs with servos. The supervision of a numerically controlled tool is limited to the control of electric motors that actuate mechanical assemblies. Control can be implemented by using specialized integrated circuits or microcontrollers. This paper presents a numerically controlled (CNC) machine with microcontroller.

Keywords

[1] Viorica Spoială, Helga Silaghi, Acţionări electrice speciale, Editura Universităţii din Oradea, 2010.Search in Google Scholar

[2] V. Iancu, D. Spoială, Viorica Spoială, Maşini electrice şi sisteme de acţionări electrice, vol.II, Ed. Universităţii din Oradea, 2006.Search in Google Scholar

[3] Daniela E. Popescu, Arhitectura și organizarea sistemelor conventionale de calcul, Editura Universitatii din Oradea, 2002.Search in Google Scholar

[4] R. Islam, et al., Permanent-magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction, IEEE Transactions on Industry Applications, vol. 45, pp. 152-160, 2009.10.1109/TIA.2008.2009653Search in Google Scholar

[5] D.S. Bernstein, Rules Rule - Real Time Engineering, IEEE Control Systems Magazine, vol. 31, no. 3, pp. 6-7. 2011.10.1109/MCS.2011.940721Search in Google Scholar

[6] J.Y. Fiset, Human-Machine Interface Design for Process Control Applications, ISA Press, USA, 2008.Search in Google Scholar

[7] Popa M., Microprocesoare şi microcontrolere, Editura Politehnică, Timişoara, 1998.Search in Google Scholar

[8] Elena Maria Marginean, Programarea și operarea mașinilor-unelte cu comandă numerică. Teste și aplicații, Editura Transilvania, Cluj-Napoca, 2015.Search in Google Scholar

[9] S. Dale, H. Silaghi, D. Zmaranda, U. Rohde, Intelligent Design Environment for Second-Order Positioning Systems, International Journal of Computers, Communications & Control, Vol. 10, Nr. 2, April, 2015, ISSN 1841-9836, pp. 165-173, 2015.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo