Human Health Concenrs of Metalworking Fluid Components

1. BRINKSMEIER, E. et al. 2015. Metalworking fluids—Mechanisms and performance. CIRP Ann. - Manuf. Technol., 64(2), pp. 605–628.Search in Google Scholar

2. LOTIERZO, A. et al. 2016. Insight into the role of amines in Metal Working Fluids. Corros. Sci.10.1016/j.corsci.2016.04.028Search in Google Scholar

3. SREEJITH, P.. S., NGOI, B., K., A. 2000. Dry machining: Machining of the future. Vol. 101, No. January 1999, pp. 287–291.Search in Google Scholar

4. VERESCHAKA, A., A. et al. 2013. Development and Research of Environmentally Friendly Dry Technological Machining System with Compensation of Physical Function of Cutting Fluids. Procedia CIRP, Vol. 7, pp. 311–316.Search in Google Scholar

5. NAJIHA, M., S., et al. 2016. Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review. Renew. Sustain. Energy Rev., Vol. 60, pp. 1008–1031.10.1016/j.rser.2016.01.065Open DOISearch in Google Scholar

6. The National Institute for Occupational Safety and Health (NIOSH), “Metalworking fluids.” [Online]. Available: https://www.cdc.gov/niosh/topics/metalworking/.Search in Google Scholar

7. FRIESEN, M., C. et al. 2016. Metalworking fluid exposure and cancer risk in a retrospective cohort of female autoworkers. Cancer Causes Control, 23(7), pp. 1075–82.Search in Google Scholar

8. ROSS, A., S. 2004. Determinants of exposure to metalworking fluid aerosol in small machine shops. Ann. Occup. Hyg., 48(5), pp. 383–391.Search in Google Scholar

9. OI, M. 2011. Emission scenario document on the use of metalworking fluids OECD Environment, Health and Safety Publications Series on Emission Scenario Documents Number 28, ENV/JM/MONO(2011)18, 33(28), pp. 1–127.Search in Google Scholar

10. KEMP, C., P, Hill, I. 2004. Health and safety aspects in the live music industry, p. 298.Search in Google Scholar

11. PARK, D. 2012. The Occupational Exposure Limit for Fluid Aerosol Generated in Metalworking Operations: Limitations and Recommendations, Saf. Health Work, 3(1), p. 1.Search in Google Scholar

12. COHEN, H., WHITE, E., M. 2006. Metalworking fluid mist occupational exposure limits: a discussion of alternative methods. J. Occup. Environ. Hyg., 3(9), pp. 501–7.Search in Google Scholar

13. CAMPANELLA, A., et al. 2010. Lubricants from chemically modified vegetable oils. Bioresour. Technol., 101(1), pp. 245–254.Search in Google Scholar

14. SHASHIDHARA, Y., M., JAYARAM, S. R. 2010. Vegetable oils as a potential cutting fluid-An eVolution. Tribol. Int., 43(5–6), pp. 1073–1081.Search in Google Scholar

15. Distribution Restriction Statement, Engineering and Design LUBRICANTS AND HYDRAULIC FLUIDS, Department of the Army U.S. Army Corps of Engineers, Engineer Manual 1110-2-1424. 1999. pp. 1–499.Search in Google Scholar

16. SCHNEIDER, M., P. 2006. Review Plant-oil-based lubricants and hydraulic fluids. J. Sci. Food Agric., Vol. 86, pp. 1769–1780.10.1002/jsfa.2559Open DOISearch in Google Scholar

17. NAGENDRAMMA, P., KAUL, S. 2012. Development of ecofriendly/biodegradable lubricants: An overview. Renew. Sustain. Energy Rev., 16(1), pp. 764–774.10.1016/j.rser.2011.09.002Open DOISearch in Google Scholar

18. BATALLER, H., et al. 2004. Cutting fluid emulsions produced by dilution of a cutting fluid concentrate containing a cationic/nonionic surfactant mixture,” J. Mater. Process. Technol., 152 (2), pp. 215–220.Search in Google Scholar

19. El BARADIE, M., A. 1996. Cutting fluids: Part I. Characterisation. Mater. Process. Technol., Vol. 56, pp. 786–797.10.1016/0924-0136(95)01892-1Open DOISearch in Google Scholar

20. El BARADIE, M., A. 1996. Cutting fluids: Part II. Recycling and clean machining. Mater. Process. Technol., Vol. 136, pp. 798–806.Search in Google Scholar

21. RUDNICK, L., R. 2006. Synthetics, Mineral Oils, and Bio-Based Lubricants Chemistry and Technology. CRC Press Taylor & Francis Group.10.1201/9781420027181Search in Google Scholar

22. MISRA, S., K., SKÖLD, R., O. 2000. Lubrication studies of aqueous mixtures of inversely soluble components. Colloids Surfaces A Physicochem. Eng. Asp., 170(2–3), pp. 91–106.Search in Google Scholar

23. DEBNATH, S., et al. 2014. Environmental friendly cutting fluids and cooling techniques in machining: a review. J. Clean. Prod., Vol. 83, pp. 33–47.10.1016/j.jclepro.2014.07.071Open DOISearch in Google Scholar

24. SULIMAN, S., M., A., et al. 1997. Microbial contamination of cutting fluids and associated hazards. Tribol. Int., 30(10), pp. 753–757.Search in Google Scholar

25. SCHWARZ, M., et al. 2015. Environmental and health aspects of metalworking fluid use. Polish J. Environ. Stud., 24(1), pp. 37–45.Search in Google Scholar

26. SAHA, R., DONOFRIO, R., S. 2012. The microbiology of metalworking fluids. Appl. Microbiol. Biotechnol., 94(5), pp. 1119–1130.10.1007/s00253-012-4055-722543351Open DOISearch in Google Scholar

27. PETTERSSON, A. 2007. High-performance base fluids for environmentally adapted lubricants. Tribol. Int., 40(4), pp. 638–645.Search in Google Scholar

28. ADHVARYU, A., et al. 2005. Synthesis of novel alkoxylated triacylglycerols and their lubricant base oil properties. Ind. Crops Prod., 21(1), pp. 113–119.10.1016/j.indcrop.2004.02.001Open DOISearch in Google Scholar

29. BELLUCO, W., De CHIFFRE, L. 2004. Performance evaluation of vegetable-based oils in drilling austenitic stainless steel. J. Mater. Process. Technol., 148(2), pp. 171–176.Search in Google Scholar

30. KLOCKE, F., et al. 2005. Combination of PVD tool coatings and biodegradable lubricants in metal forming and machining. Wear, 259(7–12), pp. 1197–1206.Search in Google Scholar

31. BURTON, B., et al. 2014. Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-milling. J. Manuf. Process., 16(3), pp. 405–413.Search in Google Scholar

32. Von WRIGHT, A. Oral toxicity of mineral oils and related compounds. A review. pp. 1–9.Search in Google Scholar

33. Health Council of the Netherlands. Aerosols of mineral oils and metalworking fluids (containing mineral oils). Health-based recommended occupational exposure limits. The Hague: Health Council of the Netherlands. 2011, publication No. 2011/12. p. 218.Search in Google Scholar