Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development

[1] Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., Holzer, C.: Materials, vol. 11, 2018, doi:10.3390/ma1105084010.3390/ma11050840Search in Google Scholar

[2] German, RM., Bose, A.: Injection molding of metals and ceramics. Princeton NJ : MPIF, 1997Search in Google Scholar

[3] Chacón, JM., Caminero, MA., García-Plaza, E., Núñez, PJ.: Materials & Design, vol. 124, 2017, p. 143, doi:10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065Search in Google Scholar

[4] Heller, BP., Smith, DE., Jack, DA.In: Proceedings of the Solid Freeform Fabrication Symposium. Austin, Texas, 2015Search in Google Scholar

[5] Kuo, C-C., Mao, R-C.: Materials and Manufacturing Processes, vol. 31, 2015, p. 1113, doi:10.1080/10426914.2015.109059410.1080/10426914.2015.1090594Search in Google Scholar

[6] Ahn, SH., Montero, M., Odell, D., Roundy, S., Wright, PK.: Rapid Prototyping Journal, vol. 8, 2002, p. 248, doi:10.1108/1355254021044116610.1108/13552540210441166Search in Google Scholar

[7] Alafaghani, A., Qattawi, A., Alrawi, B., Guzman, A.: Procedia Manufacturing, vol. 10, 2017, p. 791, doi:10.1016/j.promfg.2017.07.07910.1016/j.promfg.2017.07.079Search in Google Scholar

[8] Álvarez, K., Lagos, RF., Aizpun, M.: Ing. Inv., vol. 36, 2016, p. 110, doi:10.15446/ing.investig.v36n3.5661010.15446/ing.investig.v36n3.56610Search in Google Scholar

[9] Bellehumeur, C., Li, L., Sun, Q., Gu, P.: Journal of Manufacturing Processes, vol. 6, 2004, p. 170, doi:10.1016/S1526-6125(04)70071-710.1016/S1526-6125(04)70071-7Search in Google Scholar

[10] Carneiro, OS., Silva, AF., Gomes, R.: Materials & Design, vol. 83, 2015, p. 768, doi:10.1016/j.matdes.2015.06.05310.1016/j.matdes.2015.06.053Search in Google Scholar

[11] Elkins, K., Nordby, H., Janak, C., Gray, RW., Bøhn, HH., Baird, DG. In: Proc. 8th. Solid Freeform Fabrication Symposium. The University of Texas, Austin, August 11-13 1997, p. 441Search in Google Scholar

[12] Rahim, TNAT., Abdullah, AM., Akil, H., Mohamad, D., Rajion, ZA.: Express Polym. Lett., vol. 11, 2017, p. 963, doi:10.3144/expresspolymlett.2017.9210.3144/expresspolymlett.2017.92Search in Google Scholar

[13] Shojib Hossain, M., Espalin, D., Ramos, J., Perez, M., Wicker, R.: J. Manuf. Sci. Eng., vol. 136, 2014, p. 61002, doi:10.1115/1.402853810.1115/1.4028538Search in Google Scholar

[14] Masood, SH., Song, WQ.: Materials & Design, vol. 25, 2004, p. 587, doi:10.1016/j.matdes.2004.02.00910.1016/j.matdes.2004.02.009Search in Google Scholar

[15] Giberti, H., Strano, M., Annoni, M., Yuan, Y., Menon, L., Xu, X.: MATEC Web of Conferences, vol. 43, 2016, p. 3003, doi:10.1051/matecconf/2016430300310.1051/matecconf/20164303003Search in Google Scholar

[16] Mireles, J., Espalin, D., Roberson, D., Zinniel, B., Medina, F., Wicker, R. In: Proceedings of the Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium. Austin, Texas, 2012, p. 836Search in Google Scholar

[17] Venkataraman, N., Rangarajan, S., Matthewson, MJ., Safari, A., Danforth, SC., Yardimci, A., Guceri, SI. In: Proceedings of the Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium. Austin, Texas, 9-11 August, 1999Search in Google Scholar

[18] Wu, G., Langrana, NA., Rangarajan, S., McCuiston, R., Sadanji, R., Danforth, SC., Safari, A. In: Proceedings of the Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium. Austin, Texas, 9-11 August, 1999, p. 775Search in Google Scholar

[19] Wu, G., Langrana, NA., Sadanji, R., Danforth, S.: Materials & Design, vol. 23, 2002, p. 97, doi:10.1016/S0261-3069(01)00079-610.1016/S0261-3069(01)00079-6Search in Google Scholar

[20] Bandyopadhyay, A., Panda, RK., Janas, VF., Agarwala, MK., Danforth, SC., Safari, A.: Journal of the American Ceramic Society, vol. 80, 1997, p. 136610.1111/j.1151-2916.1997.tb02993.xSearch in Google Scholar

[21] McNulty, TF., Mohammadi, F., Bandyopadhyay, A., Shanefield, DJ., Danforth, SC., Safari, A.: Rapid Prototyping Journal, vol. 4, 1998, p. 144, doi:10.1108/1355254981023901210.1108/13552549810239012Search in Google Scholar

[22] Venkataraman, N., Rangarajan, S., Matthewson, MJ., Harper, B., Safari, A., Danforth, SC., Wu, G., Langrana, N., Guceri, SI., Yardimci, A.: Rapid Prototyping Journal, vol. 6, 2000, p. 244, doi:10.1108/1355254001037334410.1108/13552540010373344Search in Google Scholar

[23] Agarwala, MK., Weeren, R. van, Bandyopadhyay, A., Safari, A., Danforth, SC., Priedeman, WR. In: Proceedings of the Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium. Austin, Texas. Eds. DL. Bourell, et al., 1996Search in Google Scholar

[24] Agarwala, MK., Weeren, R. van, Bandyopadhyay, A., Whalen, PJ., Safari, A., Danforth, SC. In: Proceedings of the Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium. Austin, Texas. Eds. DL. Bourell, et al., 1996Search in Google Scholar

[25] Agarwala, MK., Jamalabad, VR., Langrana, NA., Safari, A., Whalen, PJ., Danforth, SC.: Rapid Prototyping Journal, vol. 2, 1996, p. 4, doi:10.1108/1355254961073203410.1108/13552549610732034Search in Google Scholar

[26] Allahverdi, M., Danforth, SC., Jafari, MA., Safari, A.: Journal of the European Ceramic Society, vol. 21, 2001, p. 1485, doi:10.1080/0015019010822517710.1080/00150190108225177Search in Google Scholar

[27] Atisivan, R., Bose, S., Bandyopadhyay, A.: Journal of the American Ceramic Society, vol. 84, 2001, p. 221, doi:10.1111/j.1151-2916.2001.tb00635.x10.1111/j.1151-2916.2001.tb00635.xSearch in Google Scholar

[28] Bandyopadhyay, A., Das, K., Marusich, J., Onagoruwa, S.: Rapid Prototyping Journal, vol. 12, 2006, p. 121, doi:10.1108/1355254061067069010.1108/13552540610670690Search in Google Scholar

[29] Iyer, S., McIntosh, J., Bandyopadhyay, A., Langrana, N., Safari, A., Danforth, SC., Clancy, RB., Gasdaska, C., Whalen, PJ.: Int J Applied Ceramic Technology, vol. 5, 2008, p. 127, doi:10.1111/j.1744-7402.2008.02193.x10.1111/j.1744-7402.2008.02193.xSearch in Google Scholar

[30] Jafari, MA., Han, W., Mohammadi, F., Safari, A., Danforth, SC., Langrana, N.: Rapid Prototyping Journal, vol. 6, 2000, p. 161, doi:10.1108/1355254001033704710.1108/13552540010337047Search in Google Scholar

[31] McNulty, TF., Shanefield, DJ., Danforth, SC., Safari, A.: Journal of the American Ceramic Society, vol. 82, 1999, p. 1757, doi:10.1111/j.1151-2916.1999.tb01996.x10.1111/j.1151-2916.1999.tb01996.xSearch in Google Scholar

[32] Pistor, CM.: Adv. Eng. Mater., vol. 3, 2001, p. 418, doi:10.1002/1527-2648(200106)3:6<418:AID-ADEM418>3.0.CO;2-QSearch in Google Scholar

[33] Rangarajan, S., Qi, G., Venkataraman, N., Safari, A., Danforth, SC.: Journal of the American Ceramic Society, vol. 83, 2000, p. 1663, doi:10.1111/j.1151-2916.2000.tb01446.x10.1111/j.1151-2916.2000.tb01446.xSearch in Google Scholar

[34] Lengauer, W., Duretek, I., Schwarz, V., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C., Morrison, V. In: Euro PM2018 Proceedings. EURO PM2018 Congress & Exhibition. Bilbao, Spain, 14. - 18. October. Bellstone : EPMA, 2018 p. 1Search in Google Scholar

[35] Bai, Y., Williams, CB.: Rapid Prototyping Journal, vol. 21, 2015, p. 177, doi:10.1108/RPJ-12-2014-018010.1108/RPJ-12-2014-0180Search in Google Scholar

[36] Hwang, KS., Hsieh, YM.: Metall Mater Trans A, vol. 27, 1996, p. 245, doi.org/10.1007/BF0264840310.1007/BF02648403Search in Google Scholar

[37] Danninger, H., Frauendienst, G., Streb, K., Ratzi, R.: Dissolution of different graphite grades during sintering of PM steels, 2001, 67, p. 7210.1016/S0254-0584(00)00422-3Search in Google Scholar

[38] Danninger, H., Gierl, C.: Processes in PM steel compacts during the initial stages of sintering, 2001, 67, p. 4910.1016/S0254-0584(00)00419-3Search in Google Scholar

[39] Danninger, H., Gierl, C., Kremel, S., et al.: Degassing and deoxidation processes during sintering of unalloyed and alloeyd pm stells, 2002, 2, p. 125Search in Google Scholar

[40] Azadbeh, M., Danninger, H., Gierl-Mayer, C.: Particle rearrangement during liquid phase sintering of Cu – 20Zn and Cu – 10Sn – 10Pb prepared from prealloyed powder, 2013, 56, p. 2, doi.org/10.1179/0032589913Z.00000000013810.1179/0032589913Z.000000000138Search in Google Scholar

[41] Oro Calderon, R. de, Campos, M., Gierl-Mayer, C., Danninger, H., Torralba, JM.: Metallurgical and Materials Transactions A, vol. 46, 2015, p. 134910.1007/s11661-014-2707-1Search in Google Scholar

[42] Butković, S., Oruč, M., Šarić, E., Mehmedović, M.: Mater Tehnol, vol. 46, 2012, p. 185Search in Google Scholar

[43] Slotwinski, JA., Garboczi, EJ., Hebenstreit, KM.: J Res Natl Inst Stand Technol, vol. 119, 2014, p. 494, doi.org/10.6028/jres.119.01910.6028/jres.119.019448729026601041Search in Google Scholar

[44] Hairer, F., Karelova, A.: Etching techniques for the microstructural characterization of complex phase steels by light microscopy, 2008, p. 50Search in Google Scholar

[45] Gierl, C., Danninger, H., Avakemian, A., Synek, J., Sattler, J., Zlatkov, BS., Maat, J., Arzl, A., Neubing, HC.: Powder Injection Moulding International, vol. 6, 2012, no. 4, p. 65Search in Google Scholar

[46] Zlatkov, BS., Griesmayer, E., Loibl, H., Aleksić, OS., Danninger, H., Gierl, C., Lukić, LS.: Science of Sintering, vol. 40, 2008, p. 79, https://doi.org/10.2298/SOS0801077Z10.2298/SOS0801077ZSearch in Google Scholar

[47] Schatt, W.: Sintervorgänge. Düsseldorf : VDI-Verlag, 1992Search in Google Scholar