Open Access

Morphological, Mechanical and Physio-chemical Performance of ortho-Cresol Epoxy Novolac Based Vinyl Ester Resin


1. Suresha, B., Kumar, K.S., Seetharamu, S. & Kumaran, P.S. (2010). Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites. Tribol. Int. 43, 602–609. DOI: 10.1016/j.triboint.2009. in Google Scholar

2. Kumar, S., Satapathy, B.K. & Patnaik, A. (2012). Thermomechanical correlations to erosion performance of short glass/carbon fiber reinforced vinyl ester resin hybrid composites. Comput. Mater. Sci. 60, 250–260. DOI: 10.1016/j.commatsci.2012. in Google Scholar

3. Shahedefar, V. & Rezadoust, A.M. (2013). Thermal and mechanical behavior of cotton/vinylester composites: Effects of some flame retardants and fibre treatment. J. Reinf. Plast. Compos. 32, 681. DOI: 10.1177/0731684413475911.10.1177/0731684413475911Search in Google Scholar

4. Stankiewicz, A., Szczygiel, I. & Szczygiel, B. (2013). Self-healing coating in anti-corrosion applications. J. Mater. Sci. 48, 8041–8051. DOI: 10.1007/s10853-013-7616-y.10.1007/s10853-013-7616-ySearch in Google Scholar

5. Yabuki. A. & Okumura, K. (2012). Self healing coatings using superabsorbent polymers for corrosion inhibition in carbon steel. Corros. Sci. 59, 258–262. DOI: 10.1016/j.corsci.2012. in Google Scholar

6. Ehsani, M., Khonakdar, H.A. & Ghadami, A. (2013). Assessment of morphological, thermal and viscoelastic properties of epoxy vinyl ester coating of glass flake and mixing method. Prog. Org. Coat. 76, 238–243. DOI: 10.1016/j.porgcoat.2012. in Google Scholar

7. Ambrogi, V., Carfagna, C., Giamberini, M., Amendola, E. & Douglas, E.P. (2002). Liquid crystalline vinyl ester resins for structural adhesives. J. Adhes. Sci. Technol. 16, 15–32. DOI: 10.1163/15685610252771130.10.1163/15685610252771130Search in Google Scholar

8. Launikitis, M.B. (1982). Vinyl Ester Resins, In Handbook of Composites, Luben, G. Ed; Van Nostrand, Reinhold Co.: New York, 38–49.Search in Google Scholar

9. Young, R.E. (1976). In Unsaturated Polyester Technology, Bruins, P.F. Ed.; Gordon and Breach: New York, 315–342.Search in Google Scholar

10. Jaswal, S. & Gaur, B. (2014). New trends in vinyl ester resins. Rev. Chem. Engg. 30(6), DOI: 10.1515/revce-2014-001210.1515/revce-2014-0012Search in Google Scholar

11. Gaur, B. & Rai, J.S.P. (1993). Rheological and thermal behavior of vinyl ester resin. Eur. Polym. J. 29, 1149–1153. DOI: 10.1016/0014-3057(93)90324-9.10.1016/0014-3057(93)90324-9Search in Google Scholar

12. Varma, I.K., Rao, B.S., Choudhry, M.S., Choudhry, V. & Varma, D.S. (1985). Effect of styrene on properties of vinyl ester resins, I. Angew. Makromol. Chem. 130, 191–199. DOI: 10.1002/apmc.1985.051300116.10.1002/apmc.1985.051300116Search in Google Scholar

13. Choudhary, M.S. & Varma, I.K. (1993). Vinyl ester resins, 3. Effect of ethyl methacrylate on thermal and mechanical properties. Angew. Makromol. Chem. 209, 33–39. DOI: 10.1002/apmc.1993.052090104.10.1002/apmc.1993.052090104Search in Google Scholar

14. Gaur, B. & Rai, J.S.P. (1992). Curing and decomposition behavior of vinyl ester resins. Polym. 33, 4210. DOI: 10.1016/0032-3861(92)90631-6.10.1016/0032-3861(92)90631-6Search in Google Scholar

15. Malik, M., Choudhary, V. & Varma, I.K. (2001). Effect of oxirane groups on curing behavior and thermal stability of vinyl ester resins. J. Appl. Polym. Sci. 82, 416–423. DOI: 10.1002/app.1866.10.1002/app.1866Search in Google Scholar

16. Bhatnagar, R. & Varma, I.K. (1989). Effect of α-methylstyrene of the curing behavior of vinyl ester resins. J. Therm. Anal. 35, 1241–1249. DOI: 10.1007/BF01913044.10.1007/BF01913044Search in Google Scholar

17. Lem, K.W. & Han, C.D. (1984). Thermokinetics of Un-saturated Polyester and Vinyl Ester Resins. Polym. Eng. Sci. 24, 175. DOI: 10.1002/pen.760240304.10.1002/pen.760240304Search in Google Scholar

18. Jaswal, S. & Gaur, B. (2013). Curing and decomposition behavior of cresol novolac based vinyl ester resins. Chem. Engine. Trans. 32, 1591–1596. DOI: 10.3303/CET1332266.Search in Google Scholar

19. Knoll, D.W., Nelson, D.H. & Keheres, P.W. (1958). Pap., 134th Am. Chem. Soc. Meet, Chicago, Division of Paint, Plastics and Printing Ink Chemistry, Paper No: 5, p. 20.Search in Google Scholar

20. Gibson, S.L., Glass, T.E., Shultz, A.R. & Riffle, J.S. (2002). Controlled molecular weight cresol-formaldehyde oligomers. Polym. 43, 2017–2019. DOI: 10.1016/S0032-3861(01)00754-6.10.1016/S0032-3861(01)00754-6Search in Google Scholar

21. Knop, A. & Pilato, L.A. (1985). Phenolic Resins, Springer-Verlag Berlin Heidelberg, New York Tokyo.10.1007/978-3-662-02429-4Search in Google Scholar

22. Sultania, M., Rai, J.S.P., Srivastava, D. (2010). Studies on the synthesis and curing of epoxidised novolac vinyl ester resin from renewable resource material. Eur. Polym. J. 46, 2019–2032. DOI: 10.1016/j.eurpolymj.2010. in Google Scholar

23. Smith, C.A., (1987). Characterization of Polymers Used in Printed Circuit Board Manufacture. Polym. Test. 7, 79–84. DOI: 10.1016/0142-9418(87)90002-X.10.1016/0142-9418(87)90002-XSearch in Google Scholar

24. Hsu, C.P. & Lee, L.J. (1993). Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 1. Phase separation and microgel formation. Polym. 34, 4496–4504. DOI: 10.1016/0032-3861(93)90156-5.10.1016/0032-3861(93)90156-5Search in Google Scholar

25. Hsu, C.P. & Lee, L.J. (1993). Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 3. Kinetic-gelation mechanism. Polym. 34, 4516–4523. DOI: 10.1016/0032-3861(93)90158-7.10.1016/0032-3861(93)90158-7Search in Google Scholar

26. Yang, Y.S.C. & Suspense, L. (1991). Curing of unsaturated polyester resins: Viscosity studies and simulations in pre-gel state. Polym. Engg. Sci. 31, 321–332. DOI: 10.1002/pen.760310505.10.1002/pen.760310505Search in Google Scholar

27. Chen, J.S. & Yu, T.L. (1998). Microgelation of unsaturated polyester resins by static and dynamic light scattering. J. Appl. Polym. Sci. 69, 871–878. DOI: 10.1002/(SICI)1097-4628(19980801)69:5<871::AID-APP5>3.0.CO;2-J.10.1002/(SICI)1097-4628(19980801)69:5<871::AID-APP5>3.0.CO;2-JSearch in Google Scholar

28. Chiu, Y.Y. & Lee, L.J. (1995). Microgel formation in the free radical crosslinking polymerization of ethylene glycol dimethacrylate (EGDMA). I. Experimental. J. Polym. Sci., Part A: Polym. Chem. 33, 257–267. DOI: 10.1002/pola.1005.080330208.Search in Google Scholar

29. Yang, Y.S. & Lee, L.J. (1988). Microstructure formation in the cure of unsaturated polyester resins. Polym. 29, 1793–1800. DOI: 10.1016/0032-3861(88)90393-X.10.1016/0032-3861(88)90393-XSearch in Google Scholar

30. Han, C.D. & Lem, K.W. (1984). Chemorheology of thermosetting resins. IV. The chemorheology and curing kinetics of vinyl ester resin. J. Appl. Polym. Sci. 29, 1879–1902. DOI: 10.1002/app.1984.070290538.10.1002/app.1984.070290538Search in Google Scholar

31. Dusek, K. & Spevacek, J. (1980). Cyclization in vinyl- divinyl copolymerization. Polym. 21, 750–756. DOI: 10.1016/0032-3861(80)90290-6.10.1016/0032-3861(80)90290-6Search in Google Scholar

32. Ziaee, S. & Palmese, G.R. (1999). Effect of temperature on cure kinetics and mechanical properties of vinyl-ester resins. J. Polym. Sci., Part B: Polym. Phys. 37, 725–744. DOI: 10.1002/(SICI)1099-0488(19990401)37:7<725::AID-POLB23>3.0.CO;2-E.10.1002/(SICI)1099-0488(19990401)37:7<725::AID-POLB23>3.0.CO;2-ESearch in Google Scholar

33. Dua, S., Mccullough, R.L. & Palmese, G.R. (1999). Copolymerization kinetics of styrene/vinyl ester systems: low temperature reactions. Polym. Compos. 20, 379–391. DOI: 10.1002/pc.10364.10.1002/pc.10364Search in Google Scholar

34. Ganem, N., Mortaigne, B., Bellenger, V. & Verdu, J. (1993). Influence of styrene ratio on copolymerization kinetics of dimethacrylate of diglycidylether of bisphenol A vinyl ester resin crosslinked with styrene. J. Macromol. Sci., Pure Appl. Chem. 30, 829–848. DOI: 10.1080/10601329308009592.10.1080/10601329308009592Search in Google Scholar

35. Ganem, M., Lafontaine, E., Mortaigne, B., Bellenger, V. & Verdu, J. (1994). Structure of vinyl ester networks: a rubber elasticity study. J. Macromol. Sci. Phys. 33, 155–172. DOI: 10.1080/00222349408248085.10.1080/00222349408248085Search in Google Scholar

Publication timeframe:
4 times per year
Journal Subjects:
Industrial Chemistry, Biotechnology, Chemical Engineering, Process Engineering