1. bookVolume 25 (2017): Issue 2 (June 2017)
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
Open Access

Modeling of Surface Geometric Structure State After Integratedformed Milling and Finish Burnishing

Published Online: 22 Apr 2017
Volume & Issue: Volume 25 (2017) - Issue 2 (June 2017)
Page range: 131 - 136
Received: 01 Jul 2016
Accepted: 01 Dec 2017
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
Abstract

The article deals with computer-based modeling of burnishing a surface previously milled with a spherical cutter. This method of milling leaves traces, mainly asperities caused by the cutting crossfeed and cutter diameter. The burnishing process - surface plastic treatment - is accompanied by phenomena that take place right in the burnishing ball-milled surface contact zone. The authors present the method for preparing a finite element model and the methodology of tests for the assessment of height parameters of a surface geometrical structure (SGS). In the physical model the workpieces had a cuboidal shape and these dimensions: (width × height × length) 2×1×4.5 mm. As in the process of burnishing a cuboidal workpiece is affected by plastic deformations, the nonlinearities of the milled item were taken into account. The physical model of the process assumed that the burnishing ball would be rolled perpendicularly to milling cutter linear traces. The model tests included the application of three different burnishing forces: 250 N, 500 N and 1000 N. The process modeling featured the contact and pressing of a ball into the workpiece surface till the desired force was attained, then the burnishing ball was rolled along the surface section of 2 mm, and the burnishing force was gradually reduced till the ball left the contact zone. While rolling, the burnishing ball turned by a 23° angle. The cumulative diagrams depict plastic deformations of the modeled surfaces after milling and burnishing with defined force values. The roughness of idealized milled surface was calculated for the physical model under consideration, i.e. in an elementary section between profile peaks spaced at intervals of crossfeed passes, where the milling feed fwm = 0.5 mm. Also, asperities after burnishing were calculated for the same section. The differences of the obtained values fall below 20% of mean values recorded during empirical experiments. The adopted simplification in after-milling SGS modeling enables substantial acceleration of the computing process. There is a visible reduction of the Ra parameter value for milled and burnished surfaces as the burnishing force rises. The tests determined an optimal burnishing force at a level of 500 N (lowest Ra = 0.24 μm). Further increase in the value of burnishing force turned out not to affect the surface roughness, which is consistent with the results obtained from experimental studies.

Keywords

[1] C.H. Chen and F.J. Shiou. “Determination of Optimal Ball-Burnishing Parameters for Plastic injection Moulding Steel”, International Journal of Advanced Manufacturing Technology, vol. 21, issue 3, March 2003, pp. 177-185.10.1007/s001700300019Search in Google Scholar

[2] D. Grochała, S. Berczyński and Z. Grządziel. “Stress in the surface layer of objects burnished after milling”, International Journal of Advanced Manufacturing Technology, vol. 72, issue 9, June 2014, pp. 1655-1663.10.1007/s00170-014-5775-xSearch in Google Scholar

[3] R. Gubała, D. Grochała and W. Olszak. „Mikrohydrauliczne narzędzie do nagniatania złożonych powierzchni przestrzennych”, Mechanik, no. 1, 2014, pp. 22-23.Search in Google Scholar

[4] J. Kalisz, K. Żak, W. Grzesik and K. Czechowski. „Characteristics of surface topography after rolling burnishing of EM AW-AlCu4MgSi(A) aluminum alloy”, Journal of Machine Engineering, vol. 15, no. 1, 2015, pp. 71-80.Search in Google Scholar

[5] W. Kwaczyński, K. Chmielewski and D. Grochała. „Programowanie frezowania i nagniatania złożonych powierzchni przestrzennych na centrach frezarskich ze sterowaniem wieloosiowym”, in Współczesne problemy technologii obróbki przez nagniatanie, vol. 3, W. Przybylski, Ed., Gdańsk: Politechnika Gdańska, Wydział Mechaniczny, 2011, pp. 179-191.Search in Google Scholar

[6] L.N. López de Lacalle, A. Lamikiz, J. Muñoa and J.A. Sánchez. “Quality improvement of ball-end milled sculptured surfaces by ball burnishing”, International Journal of Machine Tools & Manufacture, vol. 45, issue 15, December 2005, pp. 1659-1668.10.1016/j.ijmachtools.2005.03.007Search in Google Scholar

[7] L.N. López de Lacalle, A. Lamikiz, J.A. Sánchez and J.L. Arana. “The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces”, International Journal of Advanced Manufacturing Technology, vol. 32, issue 9-10, April 2007, pp. 958-968.10.1007/s00170-005-0402-5Search in Google Scholar

[8] A. Rodríguez, L.N. López de Lacalle, A. Celaya, A. Lamikiz and J. Albizuri. “Surface improvement of shafts by the deep ball-burnishing technique”, Surface & Coatings Technology, vol. 206, 2012, pp. 2817-2824.10.1016/j.surfcoat.2011.11.045Search in Google Scholar

[9] F.J. Shiou and C.H. Chen. “Ultra-precision surface finish of NAK80 mould tool steel using sequential ball burnishing and ball polishing processes”, Journal of Materials Processing Technology, vol. 201, 2008, pp. 554-559.10.1016/j.jmatprotec.2007.11.235Search in Google Scholar

[10] F.J. Shiou and C.H. Chuang. “Precision surface finish of the mold steel PDS5 using an innovative ball burnishing tool embedded with a load cell”, Precision Engineering, vol. 34, issue 1, January 2010, pp. 76-84.10.1016/j.precisioneng.2009.03.003Search in Google Scholar

[11] M. Sosnowski and D. Grochała. „Problemy technologii nagniatania powierzchni przestrzennych złożonych na centrach obróbkowych”, Mechanik, no. 1, 2011, pp. 14-18.Search in Google Scholar

[12] V.P. Kuznetsov, LYu. Smolin, A.J. Dmitrtev, S.Yu. Tarasov, V.G. Gorgots. "Toward control of subsurface strain accumulation in nanostructurin burnishin on hermostrenghened steel”. Surface&Coatings Technol. No. 285 2016, s. 171-178., http://dx.doi.org/10.1016/j.surfcoat.2015.11.045K.Search in Google Scholar

[13] Żak and W. Grzesik. “Investigation of technological effects of ball burnishing after cryogenic turning of hard steel”, Advances in Manufacturing Science and Technology, vol. 38, no. 1, 2014, pp. 37-52.10.2478/amst-2014-0003Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo