1. bookVolume 33 (2015): Issue 3 (September 2015)
Journal Details
License
Format
Journal
eISSN
2083-134X
First Published
16 Apr 2011
Publication timeframe
4 times per year
Languages
English
Open Access

CVD carbon powders modified by ball milling

Published Online: 30 Aug 2016
Volume & Issue: Volume 33 (2015) - Issue 3 (September 2015)
Page range: 521 - 528
Received: 06 Oct 2014
Accepted: 24 Apr 2015
Journal Details
License
Format
Journal
eISSN
2083-134X
First Published
16 Apr 2011
Publication timeframe
4 times per year
Languages
English
Abstract

Carbon powders produced using a plasma assisted chemical vapor deposition (CVD) methods are an interesting subject of research. One of the most interesting methods of synthesizing these powders is using radio frequency plasma. This method, originally used in deposition of carbon films containing different sp2/sp3 ratios, also makes possible to produce carbon structures in the form of powder. Results of research related to the mechanical modification of these powders have been presented. The powders were modified using a planetary ball mill with varying parameters, such as milling speed, time, ball/powder mass ratio and additional liquids. Changes in morphology and particle sizes were measured using scanning electron microscopy and dynamic light scattering. Phase composition was analyzed using Raman spectroscopy. The influence of individual parameters on the modification outcome was estimated using statistical method. The research proved that the size of obtained powders is mostly influenced by the milling speed and the amount of balls. Powders tend to form conglomerates sized up to hundreds of micrometers. Additionally, it is possible to obtain nanopowders with the size around 100 nm. Furthermore, application of additional liquid, i.e. water in the process reduces the graphitization of the powder, which takes place during dry milling.

Keywords

[1] EWSUK K.G., GOGOTSI Y., Ceram. Trans., 190 (2006), 238.Search in Google Scholar

[2] SHENDEROVA O., GRUEN D., Ultrananocrystalline Diamond: Synthesis, Properties and Applications, William-Andrew Publisher, New York, 2006.Search in Google Scholar

[3] MITURA K., KARCZEMSKA A., NIEDZIELSKI P., GRABARCZYK J., KACZOROWSKI W., LOUDA P., MITURA S., Int. J. Nanomanuf., 2 (2008), 29.10.1504/IJNM.2008.017836Search in Google Scholar

[4] PUZYR A.P., NESHUMAYEV D.A., BONDAR V.S., DOLMATOV V.YU., SHUGALEI I.V., DUBYAGO N.P., TARSKIKH S.V., MAKARSKAYA G.V., The Influence of Detonation Nanodiamond Powder on Blood Cells, in: LEE J., NOVIKOV N. (Eds.), Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing, Springer, 2005, p.155.10.1007/1-4020-3471-7_10Search in Google Scholar

[5] SRIVASTAVA S.K., VANKAR V.D., KUMAR V., Thin Solid Films, 515 (2006), 1552.10.1016/j.tsf.2006.05.009Search in Google Scholar

[6] AHMAD B., RIAZ M., AHMAD M., NAWAZ S., AHMAD S., Mater. Lett., 62 (2008), 3367.10.1016/j.matlet.2008.03.025Search in Google Scholar

[7] SOLARSKA K., GAJEWSKA A., KACZOROWSKI W., BARTOSZ G., MITURA K., Diam. Relat. Mater., 21 (2012), 107.10.1016/j.diamond.2011.10.020Search in Google Scholar

[8] BATORY M., BATORY D., GRABARCZYK J., KACZOROWSKI W., KUPCEWICZ B., MITURA K., NASTI T.H., YUSUF N., NIEDZIELSKI P., J. Nanosci. Nanotechno., 12 (2012), 9037.10.1166/jnn.2012.674523447955Search in Google Scholar

[9] CZERNIAK-RECZULSKA M., NIEDZIELSKI P., BALCERCZYK A., BARTOSZ G., KAROWICZ-BILINSKA A., MITURA K., J. Nanosci. Nanotechno., 10 (2010), 1065.10.1166/jnn.2010.185120352757Search in Google Scholar

[10] TAGUCHI G., System of experimental design, UNIPUB/Kraus International Publications New York, 1987.Search in Google Scholar

[11] PARK K.S., KIM H.G., KIM Y.H., PARK C.H., KIM K.D., Chem. Eng. Res. Des., 89 (2011), 2389.10.1016/j.cherd.2011.04.008Search in Google Scholar

[12] ALAMOLHODA S., HESHMATI-MANESH S., ATAIE A., Adv. Powder Technol., 23 (2012), 343.10.1016/j.apt.2011.04.014Search in Google Scholar

[13] AKHGAR B.N., PAZOUKI M., RANJBAR M., HOSSEINNIA A., SALARIAN R., Chem. Eng. Res. Des., 90 (2012), 220.10.1016/j.cherd.2011.07.008Search in Google Scholar

[14] ZHANG F.L., ZHU M., WANG C.Y., Int. J. Refract. Met. H., 26 (2008), 329.10.1016/j.ijrmhm.2007.08.005Search in Google Scholar

[15] FERRARI A.C., ROBERTSON J., Phys. Rev. B, 61 (2000), 14095.10.1103/PhysRevB.61.14095Search in Google Scholar

[16] CUI W.G., LAI Q.B., ZHANG L., WANG F.M., Surf. Coat. Tech., 205 (7) (2010), 1995.10.1016/j.surfcoat.2010.08.093Search in Google Scholar

[17] CHU P.K., LI L., Mater. Chem. Phys., 96 (2 - 3) (2006), 253.10.1016/j.matchemphys.2005.07.048Search in Google Scholar

[18] TAI F.C., LEE S.C., WEI C.H., TYAN S.L., Mater. Trans., 47 (2006), 1847. 10.2320/matertrans.47.1847Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo