Mechanisms of degradation of organic coatings

1. G. P. Bierwagen: Reflections on corrosion control by organic coatings, Progress in Organic Coatings 1996, 28, 43-48.10.1016/0300-9440(95)00588-9Search in Google Scholar

2. N. L. Thomas: The barrier properties of paint coatings, Progress in Organic Coatings 1991, 19, 101-121.10.1016/0033-0655(91)80001-YOpen DOISearch in Google Scholar

3. N. S. Sangaj, V. C. Malshe: Permeability of polymers in protective organic coatings, Progress in Organic Coatings 2004, 50, 28-39.10.1016/j.porgcoat.2003.09.015Open DOISearch in Google Scholar

4. J. E. O. Mayne: The mechanism of inhibition of the corrosion of iron and steel by means of paint, Official Digest 1952, 24, 127.Search in Google Scholar

5. W. Funke, H. Haagen: Prediction of the corrosion protective properties of paint films by permeability data, Journal of Oil Colour Chemical Association 1975, 58, 359.Search in Google Scholar

6. M. Stratmann, R. Feser, A. Leng: Corrosion protection by organic films, Electrochim. Acta 1994, 39, 1207-1211.10.1016/0013-4686(94)E0038-2Search in Google Scholar

7. T. Prošek, D. Thierry: A model for the release of chromate from organic coatings, Progress in Organic Coatings 2004, 49, 209-217.10.1016/j.porgcoat.2003.09.012Search in Google Scholar

8. T. Prošek, D. Thierry: Mobility and mode of inhibition of chromate at defected areas of organic coatings at atmospheric conditions, Corrosion 2004, 60, 1122-1133.10.5006/1.3299226Search in Google Scholar

9. T. Prošek, D. Thierry, M. Olsson, U. Bexell: The Effect of Chloride to Chromate Ratio on the Protective Action of Zinc Surface Films under Atmospheric Weathering Conditions, Corrosion 2007, 63, 258-267.10.5006/1.3278350Open DOISearch in Google Scholar

10. A. Nazarov, D. Thierry, T. Prošek, N. Le Bozec: Protective Action of Vanadate at Defected Areas of Organic Coatings on Zinc, Journal of Electrochemical Society 2005, 152, B220-B227.10.1149/1.1924067Search in Google Scholar

11. T. Prošek: Konverzní a organické povlaky s chromem v oxidačním stavu VI a jejich alternativy, Koroze a ochrana materiálu 2005, 49, 27-33.Search in Google Scholar

12. T. Hájková, A. Kalendová: Antikorozní vlastnosti pigmentů na základě molybdenanů a wolframanů modifikovaných vodivými polymery, Koroze a ochrana materiálů 2017, 61, 7-18.10.1515/kom-2017-0001Search in Google Scholar

13. T. Prošek, A. Nazarov, A. Le Gac, D. Thierry: Coil-coated Zn-Mg and Zn-Al-Mg: Effect of climatic parameters on the corrosion at cut edges, Progress in Organic Coatings 2015, 83, 26-35.10.1016/j.porgcoat.2015.01.023Search in Google Scholar

14. T. Prošek, A. Nazarov, H. B. Xue, S. V. Lamaka, D. Thierry: Role of steel and zinc coating thickness in cut edge corrosion of coil coated materials in atmospheric weathering conditions; Part 1: Laboratory study, Progress in Organic Coatings 2016, 99, 356-364.Search in Google Scholar

15. T. Prošek, A. Nazarov, D. Thierry: Role of steel and zinc coating thickness in cut edge corrosion of coil coated materials in atmospheric weathering conditions; Part 2: Field data and model, Progress in Organic Coatings 2016, 101, 45-50.Search in Google Scholar

16. W. Fuberth, M. Stratmann: The delamination of polymeric coatings from electrogalvanized steel - a mechanistic aspect, Corrosion Science 2001, 43, 229-241.10.1016/S0010-938X(00)00048-2Search in Google Scholar

17. A. Tahara, T. Shinohara: Morphology of corrosion products formed by edge corrosion of residual coated steel sheets, Proc. of Galvatech ’07, 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, November 18-22, 2007.Search in Google Scholar

18. T. Prošek: Urychlené cyklické korozní zkoušky, Koroze a ochrana materiálu 2016, 60, 46-49.10.1515/kom-2016-0008Search in Google Scholar

19. R. M. Souto, D. J. Scantlebury: Cathodic delamination of coil coatings produced with different Zn-based intermediate metallic layers, Progress in Organic Coatings 2005, 53, 63-70.10.1016/j.porgcoat.2005.01.008Search in Google Scholar

20. J. M. Pommersheim, T. Nguyen: Prediction of blistering in coating systems, ACS Symposium Series 689 (Organic Coatings for Corrosion Control), 137-150, 1998.10.1021/bk-1998-0689.ch011Search in Google Scholar

21. T. N. Nguyen, J. B. Hubbard, G. B. McFadden: A mathematical model for the cathodic blistering of organic coatings on steel immersed in electrolytes, Journal of Coatings Technology 1991, 63 (794), 43-52.Search in Google Scholar

22. T. Prošek, A. Nazarov, M.-G. Olivier, C. Vandermiers, D. Koberg, D. Thierry: The role of stress and topcoat properties in blistering of coil-coated materials, Progress in Organic Coatings 2010, 68, 328-333.10.1016/j.porgcoat.2010.03.003Search in Google Scholar

23. A. Nazarov, T. Prošek, D. Thierry: Application of EIS and SKP for study of metal/polymer interface, Electrochimica Acta 2008, 53, 7531-7538.10.1016/j.electacta.2007.11.053Search in Google Scholar

24. T. Prošek, A. Nazarov, J. Stoulil, D. Thierry: Evaluation of the tendency of coil-coated materials to blistering: Field exposure, accelerated tests and electrochemical measurements, Corrosion Science 2012, 61, 92-100.10.1016/j.corsci.2012.04.026Search in Google Scholar

25. K. Kreislová, A. Koukalová, D. Knotková: Trendy korozní agresivity atmosféry a korozních úbytků zinku v atmosférických podmínkách, Koroze a ochrana materiálů 2011, 55, 19-22.Search in Google Scholar