[[1] Liston, K., “Hob Basics. Part I.”, in Gear technology magazine, vol. 10, nr.5, 1993, pp. 46-52.]Search in Google Scholar
[[2] Liston, K., “Hob Basics. Part II.”, in Gear technology magazine, vol. 10, nr.6, 1993, pp. 18-24.]Search in Google Scholar
[[3] Sandeep M., Vijayakar, A. e.a., “Gear Tooth Profile Determination from Arbitrary Rack Geometry”, in Gear technology magazine, vol. 5, nr. 6, 1988, pp. 18-30.]Search in Google Scholar
[[4] Innocenti, C., (2007). “Optimal Choice of a Shaft Angle for Involute Gear Hobbing”, in Gear technology magazine, vol. 24, nr. 8, 2007, pp. 42-50.]Search in Google Scholar
[[5] Yefim, Kotlyar, (2000). “Precision Finish Hobbing”, in Gear technology magazine, vol. 17, nr.4, 2000. pp. 22-26. Retrieved on 16.04.2015, from http://www.lmt-tools.de/verzkat/page119.html #/124]Search in Google Scholar
[[6] *** DIN 3972. Wälzfräser-Bezugsprofile]Search in Google Scholar
[[7] Hollanda, D., “Bazele așchierii și generării suprafețelor II”. lecture notes, Petru Maior University of Tîrgu-Mureș, 1994.]Search in Google Scholar
[[8] Dudás, I., Bányai, K., Varga, Gy., “Simulation of meshing of worm gearing”, in American Society of Mechanical Engineers, Design Engineering Division (Publication) DE 88, 1996, pp. 141-146.]Search in Google Scholar
[[9] Dudás, I., Varga, Gy., Bányai, K., “Holonic manufacturing system for production of different sophisticated surfaces”, in Proceedings of the IASTED International Conference on Modelling, Simulation, and Optimization, 2004, pp. 72-75.]Search in Google Scholar
[[10] Varga, Gy., Balajti, Zs., Dudás, I., “Advantages of the CCD camera measurements for profile and wear of cutting tools”, in Journal of Physics: Conference Series 13 (1), 2005, pp. 159-162.10.1088/1742-6596/13/1/037]Search in Google Scholar
[[11] Dudás, I., „The Theory and Practice of Worm Gear Drives”, Penton Press, 2005.]Search in Google Scholar
[[12] Gyenge, Cs., “Determinarea profilului sculelor abrazive la detalonarea radială a frezelormelc” in Tehnologii Calitate Mașini Materiale Vol.7. București: Editura Tehnică, 1990, pp. 92-115.]Search in Google Scholar
[[13] Gyenge, Cs., “Nagy pontosságú csigakerék-lefejtőmarók tervezése és gyártása” in Gép 43:(11-12), pp. 385-394.]Search in Google Scholar
[[14] Gyenge, Cs., “A Frenet-féle triéder alkalmazása a csavarfelületek gyártástervezésében”, in Gépgyártástechnológia 32:(5-6), 1992, pp. 191-194.]Search in Google Scholar
[[15] Litvin, F.L., Fuentes, A., “Gear Geometry and Applied Theory”, Cambridge University Press.]Search in Google Scholar
[[16] Szeniczei, L., “Általános fogazás”, Műszaki Nehézipari Könyvkiadó, Budapest, 1958.]Search in Google Scholar
[[17] Radzewich, S. P., “Gear Cutting Tools”, CRC Press, NY, 2010.]Search in Google Scholar