Accesso libero

Triangulation Reconstruction for 3D Surface Based on Information Model

Cybernetics and Information Technologies's Cover Image
Cybernetics and Information Technologies
Issue Title: Special Issue on Application of Advanced Computing and Simulation in Information Systems


The aim of this paper is to address the surface reconstruction from point cloud in reverser engineering. The data was acquired through a 3D scan device and was processed as point cloud data. The points in cloud were connected to build 3D surface. The points cloud was processed in four steps to get 3D information surface. First, the subtraction scheme was used to get cover boxes ended with the set of convex was found under the convergence rule. Secondly, the points in the box were projected to the directions which were close to the normal direction method. Thirdly the overlap was avoided by using convergence rule and inner subdivision rule. Finally the information model was used to reconstruction. The method was used in landslide monitoring of Three Gorges area for 3D surface reconstruction and monitoring. The reconstruction method obtains high precision and low complexity. It is effective for large scale monitoring.

Frequenza di pubblicazione:
4 volte all'anno
Argomenti della rivista:
Computer Sciences, Information Technology