<abstract xmlns="http://www.w3.org/1999/xhtml">

Estimating the remaining service life of a forklift for an objective reference is not only a requirement of the applicable legislation but also represents a challenge for specialized technical staff.
It is well known that the first fatigue failure element of a forklift is its fork. A simulation using the SolidWorks suite and its result is presented in this article. It allows the identification of critical areas of fatigue failure.
Based on the design of the subassembly and the loading scheme of the original product, the model under analysis with finite element was made on a 1: 1 scale. The filet areas also required a comparative analysis of the results obtained depending on the choice of mesh and discretization element.
Starting from the mechanical properties of the material as well as the association with the characteristic fatigue yield curves (Wohler), a method for estimating the remaining service life of the structure is proposed. The aspect related to obtaining exact results without an excessive consumption of computing resources was also taken into account.
</abstract>

Associate Professor, Technical University of Civil Engineering

Lecturer, Technical University of Civil Engineering

PhD. Eng., Technical University of Civil Engineering

Research on the Parameters Influencing the Numerical Analysis of the Fatigue Behaviour of a Forklift-ARM

<abstract xmlns="http://www.w3.org/1999/xhtml">

Recent developments in the social sphere also cause an increase in transportation activities. Increased transport activities lead to the construction of new roads and bridges. Different bridge construction systems are available to overcome large span obstacles. Cable-stayed bridges are more advantageous construction systems than other bridge type building carrier systems in overcoming large spans through suspension cables. Therefore, it is also widely preferred by designers. The biggest factor in the development of cable-stayed bridges is undoubtedly steel cables. Cable-stayed bridges are bridge structures that become lighter with the increase of the span, which has a more expanded flexibility, and that includes a cable system with the effect of nonlinear factors. Costs of cable-stayed bridges vary according to different spans. The span as well as the deck material used in the bridge system have a great effect on the cost. In cable-stayed bridge systems, decks are constructed of reinforced concrete and steel.
The costs of cable-stayed bridges are widely discussed around the world; therefore, the effect of the span and deck material on the cost of cable-stayed bridges is being investigated. The main bearing elements of such bridges are cables, decks, and towers, and among these elements, the tower bridge carries all the weight of the bridge, even other external loads such as vehicle, wind, etc. In this study, the three-dimensional model of the cable, deck and tower elements that make up the cable-stayed bridge system was created and analysed using the CSI Bridge Program. The AASHTO LRFD Standards, which are widely used in the analysis of bridge systems with the CSI Bridge program and the design of bridge systems in the world, were used. In the study, the analysis and designs of cable-stayed bridges with reinforced concrete and steel deck at 250, 500, 750, 1000, 1500, 2000 meters span were carried out. The amount of materials and costs used in the analysis and design of the cable-stayed bridge systems were obtained and the results were interpreted.
</abstract>

Konya Technical University, Engineering and Natural Sciences Faculty

Investigation of the Effect of the Deck Material on the Cost in Cable-Stayed Bridges with Different Spans

<abstract xmlns="http://www.w3.org/1999/xhtml">

One of the most used methods of rehabilitation of road structures is the laying of a protective asphalt layer over a degraded concrete. The main problem of this solution is the reflective cracking, more precisely the transmission of the existing cracks in the lower layer in the asphalt pavement.
The method presented in this article involves an accelerated laboratory test on specimens composed of a pre-cracked concrete slab over which an asphalt slab is glued, subjected to equivalent traffic loads. This test allows the observation of the crack propagation from the lower layer to the upper layer, until it yields, through parameters such as deformed specimen, opening and length of the crack in asphalt, but also the opening of the existing crack in concrete, relative to the number of cycles.
By relating these parameters, important conclusions can be drawn about the behavior of the composite structure at reflective cracking, being able to choose the optimal recipe of the protective asphalt layer.
</abstract>

Accelerated Laboratory Testing for Reflective Cracking

<abstract xmlns="http://www.w3.org/1999/xhtml">

Concrete carbonation is a phenomenon that occurs by the penetration into the cement stone of CO2 present in the atmosphere. The phenomenon occurs in the presence of water in which CO2 dissolves, forming carbonate ions, which in turn react with calcium ions in the pores of the concrete, resulting in calcium carbonate (calcite). The diffusion of CO2 occurs through pores and surface defects, it thus penetrates deeper into the concrete and the carbonation reaction can occur at a greater depth, eventually exceeding the thickness of the cover, causing corrosion of the reinforcement. [1]
In the case of reinforced concrete bridges, corrosion induced by carbonation of concrete is one of the main causes of degradation. Thus, in the design stage of the reinforced concrete bridge structures, the inevitable process of carbonation of the concrete must be taken into account, in the design of the durability, by calculating the thickness of the concrete cover layer.
This article aims to present the concept of carbonation resistance class, which will be a major change in the standard based on which the thickness of the concrete cover for reinforcement will be determined. This presentation is made in the context of the European performance approach to durability. In this sense, an analysis of the experimental results obtained in research on concrete prepared with different types of cements, carried out in collaboration with the laboratory of the Reinforced Concrete Structures Department, within the Technical University of Civil Engineering Bucharest. Proposals for classification in the carbonation resistance classes for concretes prepared with two types of cements are also presented.
</abstract>

Fiz. Dr., Technical University of Civil Engineering

Prof. Dr. Ing., Technical University of Civil Engineering

Carbonation Resistance Classes of Concretes

<abstract xmlns="http://www.w3.org/1999/xhtml">

The cost of cement used in concrete works is on the increase and unaffordable, yet the need for hydraulic cement concrete and other cement concrete based infrastructures keeps growing with increasing population, thus the need to find alternative binding materials that can be used solely or in partial replacement of cement. The use of waste materials with pozzolanic properties in concrete production is a becoming a worldwide practice. The assessment of the pozzolanic activity of cement replacement materials is becoming increasingly important because of the need for more sustainable cementing products. In this study, a mixture of coconut shell ash and eggshell powder is used as partial replacement of hydraulic cement in ranges of 0%, 5%, 10%, 15%, and 20%. The concrete specimens were prepared at 1: 3: 2.5 mix ratio of cementitious material, fine aggregate and coarse aggregate. The mix ratio satisfied the minimum cement content of 148.32kg/m3 (250Ib/yd3) and the minimum cementitious material content of 267 kg/m3 (450Ib/yd3) for roller compacted concrete pavement. The compressive strength, splitting tensile strength and flexural strength tests were carried out to assess the strength characteristics of ternary concrete mixture containing coconut shell ash and eggshell powder and the feasibility of using coconut shell ash and eggshell powder as partial replacement of cement in industrial plant access concrete roads and parking lots. The results indicate that a mixture of coconut shell ash and eggshell powder can be used up to 20% by weight for replacement of cement in roller compacted industrial plant access concrete roads and parking lots.
</abstract>

Characterization of Coconut Shell Ash and Eggshell Powder as Supplementary Cementitious Materials in Roller Compacted Concrete Industrial Access Pavements and Parking Facilities

<abstract xmlns="http://www.w3.org/1999/xhtml">

Use of roller-compacted concrete in pavement construction is increasing. Roller compacted concrete is a zero-slump, highly compacted concrete that is placed by equipment similar to that used in asphalt pavement construction. This investigation was conducted to collect the state-of-the-art information on effects of coarse aggregate size and texture on the strength and workability of roller-compacted concrete (RCC) for pavement construction and maintenance. Concrete specimens containing cubical and rough coarse aggregate, irregular and rough coarse aggregate, angular and rough coarse aggregate, rounded/spherical and smooth coarse aggregate, and flaky/elongated and rough coarse aggregate were prepared at 1:3:3 concrete mix ratio and 0.4 water cement ratio. Laboratory testing of specimens derived from the concrete specimens showed excellent results for cubical and rough coarse aggregate, irregular and rough coarse aggregate, and angular and rough coarse aggregate. Specimens from the rounded/spherical and smooth coarse aggregate, and flaky/elongated and rough coarse aggregate performed poorly in laboratory. The study therefore recommends the use of cubical and rough coarse aggregate, and irregular and rough coarse aggregate in the production of roller-compacted concrete for pavement construction and maintenance.
</abstract>

Effects of Coarse Aggregate Shape and Texture on Engineering Properties of Roller Compacted Concrete Prepared for High Traffic Routes

<abstract xmlns="http://www.w3.org/1999/xhtml">

This document describes a system for static and dynamic monitoring of the structural health of bridges, but not only. The need to develop the system resulted from the difficulties encountered by the authors in installing and operating complex monitoring systems, composed of elements from different manufacturers, with different measurement technologies, power supplies, communication modes and software applications. The described system facilitates the integration of different measurements, sensors, power supplies and communication technologies, in a unitary system that allows both static and dynamic measurements, simultaneously.
</abstract>

Static and Dynamic Structural Health Monitoring System for Bridges

AHEAD OF PRINT

Volume 12 (2023): Issue 2 (December 2023)

Volume 12 (2023): Issue 1 (July 2023)

Volume 11 (2022): Issue 2 (December 2022)

Volume 11 (2022): Issue 1 (July 2022)

Volume 10 (2021): Issue 2 (December 2021)

Volume 10 (2021): Issue 1 (July 2021)

Volume 9 (2020): Issue 2 (December 2020)

Volume 9 (2020): Issue 1 (July 2020)

Volume 8 (2019): Issue 2 (December 2019)

Volume 8 (2019): Issue 1 (July 2019)

Volume 7 (2018): Issue 2 (December 2018)

Volume 7 (2018): Issue 1 (July 2018)

Volume 6 (2017): Issue 2 (December 2017)

Volume 6 (2017): Issue 1 (July 2017)

Volume 5 (2016): Issue 2 (December 2016)

Volume 5 (2016): Issue 1 (July 2016)

Volume 4 (2015): Issue 2 (December 2015)

Volume 4 (2015): Issue 1 (July 2015)

Volume 3 (2014): Issue 2 (December 2014)

Volume 3 (2014): Issue 1 (July 2014)

Volume 2 (2013): Issue 2 (December 2013)

Volume 2 (2013): Issue 1 (July 2013)

Volume 1 (2012): Issue 1 (December 2012)

Romanian Journal of Transport Infrastructure

Through its appearance (twice per year) magazine aims to be a high-quality scientific source of information for researchers, academics, engineers, practitioners, policy – makers, PhDs, students and anyone interested in various issues related to transport infrastructure: roads, bridges, railways and geotechnics.  The aim of the journal is to reflect the results of fundamental and applied research at a high level, maintained through a rigorous peer review performed by specialists, well known in the field, both at national and international level.  Romanian Journal of Transport Infrastructure (RJTI) involves the design, manufacture and maintenance of all categories of roads, airports, bridges, railways, tunnels and all types of transportation mean. The journal deals also with the materials and technologies in transport infrastructure and transportation engineering.  Welcome to receive original research papers involving latest discoveries and improvements in this area.  Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 