Optimization of Laser Beam Welding Parameters for 90/10 Cupronickel Alloy Welds Using Taguchi Method

[1] “Copper-nickel fabrication”, Copper Development Association (CDA), CDA Publication, 1999. p. 139 http://www.copperinfo.co.uk/alloys/copper-nickel/downloads/pub-39-copper-nickel-fabrication.pdf Search in Google Scholar

[2] Devletian, J.H., Sullivan, M.J. “Flux cored arc welding of Cu-Ni 90/10 piping with Cu-Ni 70/30 filler metal. 2006. http://www.nsrp.org/3-RA-Panel_Final_Reports/2004_Flux_Cored_Electrode_Final_Report.pdf Search in Google Scholar

[3] Padmanaban, G., V. Balasubramanian, V. “Effects of laser beam welding parameters on mechanical properties and microstructure of AZ31B magnesium alloy”, Transactions of Nonferrous Metals Society of China 21 (9), pp. 1971 – 1924, 2011. DOI: 10.1016/S1003-6326(11)60950-310.1016/S1003-6326(11)60950-3 Search in Google Scholar

[4] Chakravarthy, M. P., Ramanaiah, N, Sundara Siva Rao, B. S. K. “Effect of laser welding on mechanical properties of 70/30 Cu-Ni alloy welds”, Proc IMechE Part B: J Engineering Manufacture 228 (9), pp. 1153 – 1161, 2014. DOI: 10.1177/095440541351738610.1177/0954405413517386 Search in Google Scholar

[5] Reed, C. B., Natesan, K., Xu, Z., Smith, D. L. “The effect of laser welding process parameters on the mechanical and microstructural properties of V-4Cr-4Ti structural materials”, Journal of Nuclear Materials, 283 – 287 (2), pp. 1206 – 1209, 2000. DOI: 10.1016/S0022-3115(00)00348-210.1016/S0022-3115(00)00348-2 Search in Google Scholar

[6] Dutta Majumdar, J., Manna, I. “Laser processing of materials”, Sadhana 28, pp. 495 – 562, 2003. DOI: 10.1007/BF0270644610.1007/BF02706446 Search in Google Scholar

[7] Akman, E., Demir, A., Canel, T., Sınmazcelik, T. “Laser welding of Ti6Al4V titanium alloys”, Journal of materials processing technology 209 (8), pp. 3705 – 3713, 2009. DOI: 10.1016/j.jmatprotec.2008.08.02610.1016/j.jmatprotec.2008.08.026 Search in Google Scholar

[8] Kabir, A. S. H., Cao, X., Medraj, M., Wanjara, P. Cuddy, J. Birur, A. “Effect of welding speed and defocusing distance on the quality of laser welded Ti-6Al-4V”, Materials Science and Technology (MS&T), Laser Application in Materials Processing, Houston, Texas, pp. 2787 – 2797, 2010. Search in Google Scholar

[9] El-Batahgy, A., Kutsuna, M. “Laser beam welding of AA5052, AA5083 and AA6061 aluminum alloys”, Advances in Materials Science and Engineering 2009, 2009. DOI: 10.1155/2009/97418210.1155/2009/974182 Search in Google Scholar

[10] Jun, Y., Ming, G., Xiaoyan, Z. “Study on microstructure and mechanical properties of 304 stainless steel joints using TIG, laser and laser TIG hybrid welding”, Optics and Lasers in Engineering 48 (4), pp. 512 – 517, 2010. DOI:10.1016/j.optlaseng.2009.08.00910.1016/j.optlaseng.2009.08.009 Search in Google Scholar

[11] Anawa, E. M., Olabi, A. G. “Using Taguchi method to optimize welding pool of dissimilar laser-welded components”, Optics & Laser Technology 40 (2), pp. 379 – 388, 2008. DOI:10.1016/j.optlastec.2007.07.00110.1016/j.optlastec.2007.07.001 Search in Google Scholar

[12] Duradundi, S. B., Krishna, S. P., Buvanashekaran, G. “Parameter optimization of laser transformation hardening by using Taguchi method and utility concept”, Int J Adv Manuf Technol 52, pp. 1067 – 1077, 2011. DOI:10.1007/s00170-010-2787-z10.1007/s00170-010-2787-z Search in Google Scholar

[13] Prabakarana, M. P., Kannanb, G. R. “Optimization of laser welding process parameters in dissimilar joint of stainless steel AISI316/AISI1018 low carbon steel to attain the maximum level of mechanical properties through PWHT”, Optics and Laser Technology, 112, pp. 314 – 322, 2019. DOI: 10.1016/j.optlastec.2018.11.03510.1016/j.optlastec.2018.11.035 Search in Google Scholar

[14] M. R. Nakhaei, N. B. Mostafa Arab,and M. Hoseinpour Gollo, Experimental study on optimization of CO2 laser welding parameters for polypropylene-clay nanocomposite welds, Journal of Mechanical Science and Technology 27 (3) (2013) 843~848. DOI 10.1007/s12206-013-0109-8 Search in Google Scholar

[15] Jiangqi, L., Wenhao, H., Jiawei, X., Zhengwei, M. “Parameter optimization of laser welding of steel to Al with pre-placed metal powders using the Taguchi-response surface method”, Optics and Laser Technology 108, pp. 97 – 106, 2018. DOI: 10.1016/j.optlastec.2018.06.02610.1016/j.optlastec.2018.06.026 Search in Google Scholar

[16] Lung, K. P., Che, Ch. W., Shien, L. W., Hai, F. S. “Optimizing multiple quality characteristics via Taguchi method-based Grey analysis”, Journal of Materials Processing Technology 182 (1 – 3), pp. 107 – 116, 2007. DOI: 10.1016/j.jmatprotec.2006.07. 015 Search in Google Scholar

[17] Santha Rao, D., and Ramanaiah, N. “Process parameters optimization for producing AA6061/TiB2 composites by friction stir processing”. Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 101 – 118, 2017. DOI: 10.1515/scjme-2017-001110.1515/scjme-2017-0011 Search in Google Scholar

[18] Yijie, H., Xiangdong, G., Bo, M., Guiqian, L., Nanfeng, Z., Yanxi, Z., Deyong, Y. “Optimization of weld strength for laser welding of steel to PMMA using Taguchi design method”, Optics & Laser Technology 136, 2021. DOI: 10.1016/j.optlastec.2020.10672610.1016/j.optlastec.2020.106726 Search in Google Scholar

[19] Sathiya, P., Abdul Jaleel, M. Y., Katherasan, D. “Optimization of welding parameters for laser bead-on-plate welding using Taguchi method”, Prod. Eng. Res. Devel. 4 (5), pp. 465 – 476, 2010. DOI: 10.1007/s11740-010-0234-510.1007/s11740-010-0234-5 Search in Google Scholar

[20] Basha, S. K., Raju, M. V. J., Kolli, M. “Multi-Objective Optimization of Process Parameters for Powder Mixed Electrical Discharge Machining of Inconel X-750 Alloy Using Taguchi-Topsis Approach”, Strojnícky časopis – Journal of Mechanical Engineering 71 (1), pp. 1 – 18, 2021. DOI: 10.2478/scjme-2021-000110.2478/scjme-2021-0001 Search in Google Scholar

[21] Yan, J., Gao, M., Zeng, X. “Study on microstructure and mechanical properties of 304 stainless steel joints using TIG, laser and laser TIG hybrid welding”, Opt Laser Eng 48 (4), pp. 512 – 517, 2010. DOI: 10.1016/j.optlaseng.2009.08.00910.1016/j.optlaseng.2009.08.009 Search in Google Scholar

[22] Bijivemula, N. R., Pothur, H., Chevireddy, E. R. “Mechanical and metallurgical characterisation of Co2 laser beam welding AISI 4130 and AISI 310 sheets of steel”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 19 – 30, 2021. DOI: 10.2478/scjme-2021-001410.2478/scjme-2021-0014 Search in Google Scholar

[23] Xiansheng, N., Zhenggan, Z., Xiongwei, W., Luming, L. “The use of Taguchi method to optimize the laser welding of sealing neuro-stimulator”, Optics and Lasers in Engineering 49 (3), pp. 297 – 304, 2011. DOI: 10.1016/j.optlaseng.2010.11.00510.1016/j.optlaseng.2010.11.005 Search in Google Scholar

[24] Lung, K. P., Che, Ch. W., Ying, Ch. H., Kye, Ch. H. “Optimization of Nd:YAG laser welding onto magnesium alloy via Taguchi analysis”, Optics & Laser Technology 37 (1), pp. 33 – 42, 2005. DOI: 10.1016/j.optlastec.2004.02.00710.1016/j.optlastec.2004.02.007 Search in Google Scholar

[25] Yang, D., Li, X., He, D., Nie, Z., Huang, H. “Optimization of weld bead geometry in laser welding with filler wire process using Taguchi’s approach”, Optics & Laser Technology 44 (7), pp. 2020 – 2025, 2012. DOI: 10.1016/j.optlastec.2012.03.03310.1016/j.optlastec.2012.03.033 Search in Google Scholar