Performance optimisation of the turning process along with multi-surface heating process

[1] Omole S, Lunt A, Kirk S, Shokrani A. Advanced processing and machining of Tungsten and its alloys. J. Manuf. Mater. Process. 2022;6(1)–15. doi: 10.3390/jmmp6010015. OmoleS LuntA KirkS ShokraniA Advanced processing and machining of Tungsten and its alloys J. Manuf. Mater. Process. 2022 6 1 15 10.3390/jmmp6010015 Open DOISearch in Google Scholar

[2] Madesh S, Charles CCD, Sathishkumar D. Recent developments in conventional machining for metals and composite materials. Adv. Manuf. Tech. Eng. Eng. Mater. 2022;82–102. doi: 10.4018/978-1-7998-9574-9.ch005. MadeshS CharlesCCD SathishkumarD Recent developments in conventional machining for metals and composite materials Adv. Manuf. Tech. Eng. Eng. Mater. 2022 82 102 10.4018/978-1-7998-9574-9.ch005 Open DOISearch in Google Scholar

[3] Lajis MA, Amin AKMN, Karim ANM, Radzi HCDM, Ginta TL. Hot machining of hardened steels with coated carbide inserts. Am. J. Eng. Appl. Sci. 2009;2(2) 421–7. doi: 10.3844/ajeassp.2009.421.427. LajisMA AminAKMN KarimANM RadziHCDM GintaTL Hot machining of hardened steels with coated carbide inserts Am. J. Eng. Appl. Sci. 2009 2 2 421 7 10.3844/ajeassp.2009.421.427 Open DOISearch in Google Scholar

[4] Karabulut S, Bilgin M, Karakoc H, Skondras Giousios D, Markopoulos AP. Study of the heat-assisted milling of Ti–6Al–4V under dry and minimum-quantity-lubrication. Arab. J. Sci. Eng. 2022; 47 9287–304. doi: 10.1007/s13369-022-06878-3. KarabulutS BilginM KarakocH Skondras GiousiosD MarkopoulosAP Study of the heat-assisted milling of Ti–6Al–4V under dry and minimum-quantity-lubrication Arab. J. Sci. Eng. 2022 47 9287 304 10.1007/s13369-022-06878-3 Open DOISearch in Google Scholar

[5] Kim JH, Lee CM, Kim DH. The effect of plasma-assisted machining and additive path strategies of Inconel 718 manufactured with directed energy deposition. J. Mater. Res. Technol. 2022; 19 1658–72. doi: 10.1016/j.jmrt.2022.05.108. KimJH LeeCM KimDH The effect of plasma-assisted machining and additive path strategies of Inconel 718 manufactured with directed energy deposition J. Mater. Res. Technol. 2022 19 1658 72 10.1016/j.jmrt.2022.05.108 Open DOISearch in Google Scholar

[6] Balamuruga K. Metrological changes in surface profile, chip, and temperature on end milling of M2HSS die steel. Int. J. Mach. 2020;22: 443–453. BalamurugaK Metrological changes in surface profile, chip, and temperature on end milling of M2HSS die steel Int. J. Mach. 2020 22 443 453 Search in Google Scholar

[7] Rao TB. Reliability analysis of the cutting tool in plasma-assisted turning and prediction of machining characteristics. Aust. J. Mech. Eng. 2020;1–15. doi: 10.1080/14484846.2020.1769458. RaoTB Reliability analysis of the cutting tool in plasma-assisted turning and prediction of machining characteristics Aust. J. Mech. Eng. 2020 1 15 10.1080/14484846.2020.1769458 Open DOISearch in Google Scholar

[8] Parida AK, Maity K. Study of machinability in heat-assisted machining of nickel-base alloy. Measurement. 2021;170. doi: 10.1016/j.measurement.2020.108682. ParidaAK MaityK Study of machinability in heat-assisted machining of nickel-base alloy Measurement. 2021 170 10.1016/j.measurement.2020.108682 Open DOISearch in Google Scholar

[9] Bharat N, Bose PSC. An overview on machinability of hard to cut materials using laser assisted machining. Mater. Today Proc. 2021;43: 665–72. doi: 10.1016/j.matpr.2020.12.587. BharatN BosePSC An overview on machinability of hard to cut materials using laser assisted machining Mater. Today Proc. 2021 43 665 72 10.1016/j.matpr.2020.12.587 Open DOISearch in Google Scholar

[10] Olsson M, Akujarvi V, Stahl JE, Bushlya V. Cryogenic and hybrid induction-assisted machining strategies as alternatives for conventional machining of refractory tungsten and niobium. Int. J. Refract. Hard Met. 2021;97–105. doi: 10.1016/j.ijrmhm.2021.105520. OlssonM AkujarviV StahlJE BushlyaV Cryogenic and hybrid induction-assisted machining strategies as alternatives for conventional machining of refractory tungsten and niobium Int. J. Refract. Hard Met. 2021 97 105 10.1016/j.ijrmhm.2021.105520 Open DOISearch in Google Scholar

[11] Parida AK, Maity K. Modeling of machining parameters affecting flank wear and surface roughness in hot turning of Monel-400 using response surface methodology (RSM). Measurement. 2019;137: 375–81. doi: 10.1016/j.measurement.2019.01.070. ParidaAK MaityK Modeling of machining parameters affecting flank wear and surface roughness in hot turning of Monel-400 using response surface methodology (RSM) Measurement. 2019 137 375 81 10.1016/j.measurement.2019.01.070 Open DOISearch in Google Scholar

[12] Sofuoglu MA, Çakir FH, Gurgen S, Orak S, Ku¸shan MC. Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning. Int. J. Adv. Manuf. Technol. 2018;95: 83–97. doi: 10.1007/s00170-017-1153-9. SofuogluMA ÇakirFH GurgenS OrakS Ku¸shanMC Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning Int. J. Adv. Manuf. Technol. 2018 95 83 97 10.1007/s00170-017-1153-9 Open DOISearch in Google Scholar

[13] Maity K, Parida AK. Comparison of the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation. Eng. Sci. Technol. Int. J. 2018;21: 364–70. doi: 10.1016/j.jestch.2018.03.018. MaityK ParidaAK Comparison of the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation Eng. Sci. Technol. Int. J. 2018 21 364 70 10.1016/j.jestch.2018.03.018 Open DOISearch in Google Scholar

[14] Baek JT, Woo WS, Lee CM. A study on the machining characteristics of induction and laser-induction assisted machining of AISI 1045 steel and Inconel 718. J. Manuf. Process. 2018;34: 513–22. doi: 10.1016/j.jmapro.2018.06.030. BaekJT WooWS LeeCM A study on the machining characteristics of induction and laser-induction assisted machining of AISI 1045 steel and Inconel 718 J. Manuf. Process. 2018 34 513 22 10.1016/j.jmapro.2018.06.030 Open DOISearch in Google Scholar

[15] Parida AK, Maity K. Experimental investigation on tool life and chip morphology in hot machining of Monel-400. Eng Sci Technol Int J. 2018;21: 371–9. doi: 10.1016/j.jestch.2018.04.003. ParidaAK MaityK Experimental investigation on tool life and chip morphology in hot machining of Monel-400 Eng Sci Technol Int J. 2018 21 371 9 10.1016/j.jestch.2018.04.003 Open DOISearch in Google Scholar

[16] Sanchez LE, Mello HJ, Neto RRI, Davim JP. Hot turning of a difficult-to-machine steel aided by infrared radiation. Int. J. Adv. Manuf. Technol. 2014;73: 887–98. doi: 10.1007/s00170-014-5879-3. SanchezLE MelloHJ NetoRRI DavimJP Hot turning of a difficult-to-machine steel aided by infrared radiation Int. J. Adv. Manuf. Technol. 2014 73 887 98 10.1007/s00170-014-5879-3 Open DOISearch in Google Scholar

[17] Soundarrajan M, Thanigaivelan R. Electrochemical micromachining of copper alloy through hot air assisted electrolyte approach. Russ. J. Electrochem. 2021;57: 172–82. doi: 10.1134/S1023193521020117. SoundarrajanM ThanigaivelanR Electrochemical micromachining of copper alloy through hot air assisted electrolyte approach Russ. J. Electrochem. 2021 57 172 82 10.1134/S1023193521020117 Open DOISearch in Google Scholar

[18] Saravanan KG, Thanigaivelan R, Soundarrajan M. Comparison of electrochemical micromachining performance using TOPSIS, VIKOR and GRA for magnetic field and UV rays heated electrolyte. Bull. Pol. Acad. Sci. Tech. 2021;69. doi: 10.24425/bpasts.2021.138816. SaravananKG ThanigaivelanR SoundarrajanM Comparison of electrochemical micromachining performance using TOPSIS, VIKOR and GRA for magnetic field and UV rays heated electrolyte Bull. Pol. Acad. Sci. Tech. 2021 69 10.24425/bpasts.2021.138816 Open DOISearch in Google Scholar

[19] Soundarrajan M, Thanigaivelan R, Investigation on electrochemical micromachining (ECMM) of copper inorganic material using UV heated electrolyte. Russ. J. Appl. Chem. 2018;91: 1805–13. doi: 10.1134/S1070427218110101. SoundarrajanM ThanigaivelanR Investigation on electrochemical micromachining (ECMM) of copper inorganic material using UV heated electrolyte Russ. J. Appl. Chem. 2018 91 1805 13 10.1134/S1070427218110101 Open DOISearch in Google Scholar

[20] Soundarrajan M, Thanigaivelan R. Investigation of electrochemical micromachining process using ultrasonic heated electrolyte. Adv Micro Nano Manuf Surf Eng. 2019;423–434. doi: 10.1007/978-981-32-9425-7_38. SoundarrajanM ThanigaivelanR Investigation of electrochemical micromachining process using ultrasonic heated electrolyte Adv Micro Nano Manuf Surf Eng. 2019 423 434 10.1007/978-981-32-9425-7_38 Open DOISearch in Google Scholar

[21] Gunasekaran, K., Pradeep Kumar, G., Thanigaivelan, R., Arunachalam, R., Shanmugam, V. Optimization of turning parameters of cryogenic soaked AZ91 magnesium alloy using TOPSIS coupled Taguchi technique. J. New Mater. Electrochem. 2021;24(1): 49–54. doi: 10.14447/jnmes.v24i1.a09. GunasekaranK. Pradeep KumarG. ThanigaivelanR. ArunachalamR. ShanmugamV. Optimization of turning parameters of cryogenic soaked AZ91 magnesium alloy using TOPSIS coupled Taguchi technique J. New Mater. Electrochem. 2021 24 1 49 54 10.14447/jnmes.v24i1.a09 Open DOISearch in Google Scholar

[22] Soundarrajan M, Thanigaivelan R. Intervening variables in electrochemical micro machining for copper. International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10). Indian Institute of Technology Madras. India. 2017. SoundarrajanM ThanigaivelanR Intervening variables in electrochemical micro machining for copper International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10) Indian Institute of Technology Madras India 2017 Search in Google Scholar

[23] Suresh S, Venkatesan K, Natarajan E, Rajesh S. Performance analysis of nano silicon carbide reinforced swept friction stir spot weld joint in AA6061-T6 alloy. Silicon. 2021;13: 3399–412. doi: 10.1007/s12633-020-00751-4. SureshS VenkatesanK NatarajanE RajeshS Performance analysis of nano silicon carbide reinforced swept friction stir spot weld joint in AA6061-T6 alloy Silicon. 2021 13 3399 412 10.1007/s12633-020-00751-4 Open DOISearch in Google Scholar

[24] Suresh S, Venkatesan K, Rajesh S. Optimization of process parameters for friction stir spot welding of AA6061/Al2O3 by Taguchi method. AIP Conf. Proc. 2019;1–10. doi: 10.1063/1.5117961. SureshS VenkatesanK RajeshS Optimization of process parameters for friction stir spot welding of AA6061/Al2O3 by Taguchi method AIP Conf. Proc. 2019 1 10 10.1063/1.5117961 Open DOISearch in Google Scholar

[25] Muhammad R, Maurotto A, Roy A, Silberschmidt VV. Hot ultrasonically assisted turning of β-Ti alloy. Procedia CIRP. 2010;1: 336–41. MuhammadR MaurottoA RoyA SilberschmidtVV Hot ultrasonically assisted turning of β-Ti alloy Procedia CIRP. 2010 1 336 41 Search in Google Scholar

[26] Ranganathan S, Senthilvelan T, Sriram G, Evaluation of machining parameters of hot turning of stainless steel (Type 316) by applying ANN and RSM. Mater. Manuf. Process. 2010;25: 1131–41. doi: 10.1080/10426914.2010.489790. RanganathanS SenthilvelanT SriramG Evaluation of machining parameters of hot turning of stainless steel (Type 316) by applying ANN and RSM Mater. Manuf. Process. 2010 25 1131 41 10.1080/10426914.2010.489790 Open DOISearch in Google Scholar

[27] Maity KP, Swain PK. An experimental investigation of hot-machining to predict tool life. J. Mater. Process. Technol. 2008;198: 344–49. doi: 10.1016/j.jmatprotec.2007.07.018. MaityKP SwainPK An experimental investigation of hot-machining to predict tool life J. Mater. Process. Technol. 2008 198 344 49 10.1016/j.jmatprotec.2007.07.018 Open DOISearch in Google Scholar

[28] Madhavulu G, Ahmed B. Hot machining process for improved metal removal rates in turning operations. J. Mater. Process. Technol. 1994;44: 199–206. doi: 10.1016/0924-0136(94)90432-4. MadhavuluG AhmedB Hot machining process for improved metal removal rates in turning operations J. Mater. Process. Technol. 1994 44 199 206 10.1016/0924-0136(94)90432-4 Open DOISearch in Google Scholar

[29] Lajis MA, Nurul Amin AKM, Karim ANM. Surface integrity in hot machining of AISI D2 hardened steel. Adv Mater Res. 2012;500: 44–50. doi: 10.4028/www.scientific.net/AMR.500.44. LajisMA Nurul AminAKM KarimANM Surface integrity in hot machining of AISI D2 hardened steel Adv Mater Res. 2012 500 44 50 10.4028/www.scientific.net/AMR.500.44 Open DOISearch in Google Scholar

[30] Suresh S, Elango NK, Venkatesan Lim WH, Palanikumar K, Rajesh S. Sustainable friction stir spot welding of 6061-T6 aluminium alloy using improved non-dominated sorting teaching learning algorithm. J. Mater. Res. Technol. 2020;9: 11650–74. doi: 10.1016/j.jmrt.2020.08.043. SureshS ElangoNK Venkatesan LimWH PalanikumarK RajeshS Sustainable friction stir spot welding of 6061-T6 aluminium alloy using improved non-dominated sorting teaching learning algorithm J. Mater. Res. Technol. 2020 9 11650 74 10.1016/j.jmrt.2020.08.043 Open DOISearch in Google Scholar