The publication analyses the possibility of separating hydrogen from coke oven gas for further use in the transport sector in the FCEV segment (fuel cell electric vehicles). The construction of the separation installation using the PSA (pressure swing adsorption) method guaranteeing high purity of hydrogen was assumed, according to the requirements of ISO 14678-2:2012 and SAE J-2719 standards. The PSA technology is widely used in industrial gas separation processes, however, due to the composition of coal gas, which apart from hydrogen and methane consists of impurities in the form of hydrocarbons, sulphur compounds, chlorine, etc., it needs to be adapted to the needs of separation of hydrogen from coke oven gas. The study shows the total possible hydrogen production potential and then, in agreement with the JSW Group’s Coking Plants, limits were set for hydrogen production in PSA technology at Przyjaźń, Jadwiga and Radlin Coking Plants, without the negative impact of the separation installation on technological processes associated with coke oven battery firing, operation of existing power units, gas compression systems and taking into account securing the needs of external customers for coke oven gas. Additionally, in order to determine the Polish market demand for high-purity hydrogen, an analysis was carried out which indicates that in 2030 the share of FCEVs will be 2%, so the demand for hydrogen in this segment would be negligible compared to the supply of hydrogen produced in a large-scale installation. Due to the need to build such a market and adapt the parameters of the installation to the variable parameters of coke oven gas, the pilot scale of the installation and the target location of the installation at the Przyjaźń Coking Plant were indicated as the most optimal.
Keywords
- Hydrogen
- Coke oven gas
- Fuel Cell Electric Vehicles
- Pressure swing adsorption
Benefits of Installing a Photovoltaic Power-Generation System for a Warehouse Facility Circular Economy – Challenges for Mining and Power Generation as Exemplified by Poland Key Performance Indicators (KPIs) as a Tool to Improve Product Quality Determining the Permissible Longwall Face Advance in the Protective Pillar Conditioning the Liquidation of a Mining Shaft Geostatistical Methods as a Tool Supporting Revitalization of Industrially Degraded and Post-Mining Areas Addressing Energy Efficiency by Periodical Energy Audits Creating an Academic Program Focusing on Energy Management and Sustainability Functioning Efficiency of the Central Air-Conditioning System on the Selected Example Industrial Noise as a Source of Threat in the Field of Blasting Technology in Coal Mines Methods and Proposals for Meeting Energy Needs Rehabilitation of Post-Mining Areas in the Bohumin City Area (Czech Republic). Case Study Petrographic and Chemical Research on Furnace Wastes From Individual Heating Furnaces and Boilers – Method for Identification of Co-Burning Municipal Waste Economic Assessment of Methods of Coal and Gas Outburst Prevention in the Extraction of Coalfaces Rating of the Activities of Urban Transport Policy in the Context of Sustainable Development The Study of Factors that Caused High Profitability of Russian Fisheries in 2014-2016 Analysis of Methane Concentration Distribution at U-Ventilated Longwall Outlet – Case Study Methane – Fuel Gas. Opportunities and Threats One-Day Prognoses of Methane Concentrations for the 102 Longwall in the 325/1 Seam in the “W” Coal Mine Operating in a Continuous System Study of the Accuracy of Methane Concentration Forecasts in the Area of Longwall Outlet B-3 in Seam 407/1 in KWK “Borynia-Zofiówka” Ruch Zofiówka Information Value of the Segment Reporting in the Polish Energy Sector Subsidies as Financing Opportunities – the Development of Renewable Energy Sources in Poland Analysis of Gas-Geodynamic Phenomena During the Preparatory and Mining Works in Seam 358/1 at KWK “Budryk” The Cutting Resistance of Rock Salt in Function of Temperature Key Points of the Management System for the Safety of Passengers Travelling with Low-Pressure Trains Conical Picks for Undeground Mining Economic Factors of Vacuum Rail’s Competitiveness in Poland Compared to Alternative Solutions A New Look at the Geological Structure of the Knurów Hard Coal Deposit in Light of Model Tests Analysis of Stoppages in the Process of Roadway Drivage Caused by Exceeding the Maximum Allowable Level of Methane Concentration Analysis of the Vibration Measurement and Reduction Possibilities in Linear Infrastructure for Vacuum Rail Technology Conical Pick Production Process Impact of the Winding Angle of the Auger Blade on the Loading Process With Milling Auger Drums The Use of a Stereovision System in Shape Detection of the Side Surface of the Body of the Mining Machine Working Unit Potential for Tunnel Technology in the Development of Hyperloop Vacuum Rail Production of Hydrogen from Coke Oven Gas in JSW Group The Influence of an Operating Conditions on the Friction Coefficient in Transportation Machines Drives Unification of Equipment for Transporting People, Coal and Materials Produced by Jastrzębskie Zakłady Remontowe Sp. z o. o. and Used in the Mines of the JSW Capital Group On the Temporal Variability of Air Pollutants’ Emissions – Case Study of Residential PM10 Emission in Silesian Metropolis Review of a Modern Technical Solution in Continuous Miner Machine Technology The Analysis of Effectiveness of Conveyor Belt Tensioning Systems Small Zero-Utility Passive Houses as a Method of Lowering Smog and Protecting the Environment