<abstract>
<title style='display:none'>Abstract</title>
In-service non-destructive inspection (NDI) is a very important part of the aircraft maintenance program that minimizes aircraft breakdowns due to the fracture of critical components. The eddy current (EC) NDI method is one of the most applicable methods for this purpose, due to its high sensitivity to fatigue cracks and corrosion damage in the main structural materials. In this paper, selective double differential type EC probes characterized by the enhanced possibility of detecting subsurface cracks initiated by fatigue or stress corrosion phenomena are presented. For different applications, a family of double differential type EC probes was developed with different sizes (from 5 to 33 mm) and different spatial resolutions. These types of probes are characterized by different operational frequencies in a wide frequency range (from 0.2 kHz to 1.0 MHz), high penetration depth and unique sensitivity to subsurface defects of different types (like elongated fatigue cracks or local corrosive pitting), and a high level of specific noise suppression concerned with the scanning inspection procedures. The EC probes proposed were investigated as effective tools for characteristic aircraft applications concerned with subsurface defect detection in multilayer structures, such as the detection of cracks in the second layer of a riveted two-layer structure or cracks initiated on the side surface of a multilayer structure with the suppression of the reinforcing hoop influence; the detection of subsurface defects in arc welding with a rough surface; the detection of cracks through repair patches fabricated from aluminum alloy or carbon fiber reinforced plastic, etc. These techniques create remarkable possibilities for the well-timed detection of dangerous damage without disassembling the aircraft structure or removing protective coating.
</abstract>

Eddy Current Techniques for Detecting Hidden Subsurface Defects in Multilayer Aircraft Structures

<abstract>
<title style='display:none'>Abstract</title>
This paper presents a concept of a small scale liquid-propellant rocket engine designed in AGH Space Systems for sounding rocket. During preliminary design of thermal aspects various ways of cooling were evaluated and described. Possible issues and design approaches for ablative, radiation and regenerative cooling are raised. The authors describe available solutions. Regenerative cooling is especially concerned as it is most popular solution in bi-liquid engines, in which alcohol fuel acts as coolant and is preheated before it reaches combustion chamber. To estimate a possible temperature distribution - and thus an applicability of such a system in the engine - a mathematical model of heat transfer was developed. Unique element of said engine is its oxidizer - nitrous oxide, which have been rarely used to date. Comparison between typical LOX bi-liquids is given and major differences that affect cooling arrangement are discussed. The authors compared different combinations of coolants, fuel/oxidizer ratios etc. to optimize the temperature distribution which is a key factor for the engine performance.
</abstract>

Preliminary Design Analysis of Regenerative Cooling for N2O/Alcohol Small Scale Liquid Rocket Engine

<abstract>
<title style='display:none'>Abstract</title>
This paper describes the recent theoretical and experimental research by the Netherlands Organisation for Applied Scientific Research (TNO) into green replacements for hydrazine, hydrazine derivatives and nitrogen tetroxide, as propellants for in-space propulsion. The goal of the study was to identify propellants that are capable of outperforming the current propellants for space propulsion and are significantly less hazardous for humans and the environment. Two types of propellants were investigated, being monopropellants and bipropellants. The first section of the paper discusses the propellant selection. Nitromethane was found to be the most promising monopropellant. As bipropellant, a combination of hydrogen peroxide (HP) and ethanol was selected, where the ethanol is rendered hypergolic with hydrogen peroxide. The second part of the paper describes the experimental verification of these propellants by means of engine testing. Initiation of the decomposition of nitromethane was found to be problematic, hypergolic ignition of the hydrogen peroxide and ethanol bipropellant however was successfully demonstrated.
</abstract>

Green Propulsion Research at TNO the Netherlands

<abstract>
<title style='display:none'>Abstract</title>
The paper presents results of simulation calculations concerning an influence of stiffness of blade-hub connection on rotor loads and blades deflections in hover, level flight and pull up maneuver. The three versions of rotor are considered with articulated, elastic and stiff connections of blades and hub. The blades with the same distributions of stiffness, mass and the same aerodynamic characteristics are applied for all rotor cases. The rotor loads are calculated applying Runge-Kutta method to solve the equations of motion of deformable blades. According to the Galerkin method, the parameters of blades motion are treated as combination of considered blade bending and torsion eigen modes. The results of calculations indicate for possibility to generate the greater rotor control moments and to improve helicopter maneuverability in the case of applying the non-changed blade of articulated rotor combined with elastic rotor hub.
</abstract>

A Comparison of Helicopter Main Rotor Features Due to Stiffness of Rotor Blade-Hub Connection

<abstract>
<title style='display:none'>Abstract</title>
The increasing level of urbanisation and traffic congestion promotes the concept of urban air mobility (UAM), which has become a thriving topic in engineering and neighbouring disciplines. the development of a suitable ground-based infrastructure is necessary to supply these innovative vehicles, which mainly includes networks of take-off and landing sites, facilities for maintenance, energy supply, and navigation and communication capabilities. Further requirements comprise robust business and operating models for emerging service providers and regulatory frameworks, particularly regarding safety, liability and noise emissions. the objective of this study is to provide an overview of the current results and developments in the field of UAM ground-based infrastructure by conducting a systematic literature review (SLr) and to identify the most relevant research gaps in the field. For the systematic literature analysis, our search string contains vertiports and the equivalents, UAM and equivalents, and search phrases for the individual domains. In the final analysis 64 articles were included, finding a strong focus on simulations and vertiport networks, while specific case studies and related aspects like automated MrO and urban planning appear less frequently. therefore, this article provides insights for a more holistic perspective on challenges and necessities of future UAM.
</abstract>

A Systematic Review of Ground-Based Infrastructure for the Innovative Urban Air Mobility

<abstract>
<title style='display:none'>Abstract</title>
This paper is a review of testing methods dedicated for sandwich type composite structures with honeycomb core. First, information about the composition of sandwich materials structures, their properties, types of core materials and applications in the industry is presented. Mechanical properties were compared in the case of different types of the core material. Later, tests methods needed to describe properties of those materials and normalization organizations which create them were mentioned. The testing methods were divided into two groups: mechanical and physicochemical tests. Mechanical properties are: compressive strength (two types of test), edge compressive strength, shear strength (in two directions) and tension strength (two types of test). Physicochemical properties are: material density, water migration, water absorption and thermal conductivity. Testing methods were described according to American Society for Testing and Materials (ASTM) standards. This article is based on professional literature and the author’s experience.
</abstract>

Review of Testing Methods Dedicated for Sandwich Structures with Honeycomb Core

<abstract>
<title style='display:none'>ABSTRACT</title>
This paper analyzes approaches to developing models for the technical exploitation (TE) of aircraft within operational management framework. The operational management contour of the TE of the airline’s AC fleet is considered as a TE process consisting of a sequence of flight routes, which, in turn, comprise a sequence of flights between airports in the airline network during the calendar interval when the aircraft are in this contour. We present a model that evaluates the capacity for aircraft recovery at the network airports of a hypothetical airline (dubbed “RAF”) if the need so arises, utilizing the probabilistic and temporal characteristics of the airports used for aircraft recovery.
</abstract>

Analysis of Approaches to Assessing Flight Delays Due to Technical Issues at Airline Network Airports Within the Operational Management Framework

<abstract>
<title style='display:none'>ABSTRACT</title>
This paper explores strategies for extending the operational lifespan of flame tubes in turbofan engines – a critical component for maintaining engine efficiency and reliability, in line with global trends aimed at maximizing the use of laid reserves of aircraft engine performance. Utilizing a combination of advanced computational simulations and empirical research, the study meticulously analyzes the internal processes within the flame tube of the AL-31F turbofan engine. A detailed geometric model and finite element grid were created and adapted to simulate various operating conditions and assess their impact on the flame tube’s performance. Special attention is given to understanding the thermal and mechanical stresses that influence its durability and serviceability. The results, compared against experimental data, validate the simulations and are crucial for identifying critical sections prone to damage, thereby facilitating enhanced decision-making regarding maintenance schedules and overhaul practices. This approach not only aims to minimize downtime and reduce maintenance costs but also extends the service intervals for critical engine components, thereby improving thermocyclic durability based on the damage mechanisms identified.
</abstract>

Numerical Simulation of Workflow for Evaluating Flame Tube Thermocyclic Durability

<abstract>
<title style='display:none'>ABSTRACT</title>
This paper addresses the persistent challenges in speech processing within the Air Traffic Control (ATC) domain, a field where despite extensive research, issues such as handling noisy environments, accented speech, and the need for strict adherence to standard phraseology continue to undermine conventional language models. Our study employs a hybrid approach that integrates syntactic analysis with advanced machine learning classification algorithms – Logistic Regression, Lagrangian Support Vector Machine, and Naïve Bayes. By mixing and matching algorithms tailored for specific aspects of speech processing, our approach moves away from traditional reliance on a singular integrated system, illustrating through rigorous testing with the ATCOSIM dataset that such a multifaceted strategy markedly improves command recognition accuracy and adapts more effectively to the unique linguistic features of ATC speech. Results highlight the superior performance of Logistic Regression across various command recognition categories, pointing towards a promising direction for future advancements in ATC speech recognition technologies aimed at reducing human workload and increasing automation precision. This paper explores the complexities of the required analysis techniques and underscores the necessity of employing diverse algorithms in the processing pipeline to enhance overall system accuracy.
</abstract>

Enhancing Command Recognition in Air Traffic Control Through Advanced Classification Techniques

<abstract>
<title style='display:none'>ABSTRACT</title>
Eddy current array (ECA) technology is increasingly being used in the aerospace industry for non-destructive testing of aircraft components. This study evaluates the performance of ECA in detecting defects in aircraft components, focusing on its effectiveness, reliability, and sensitivity. The study evaluates the effectiveness of ECA technology in eddy current defectoscopy by introducing a dimensionless efficiency coefficient, then seeks to validate this coefficient through experimental testing of aircraft component materials with artificially induced defects of various sizes, types, and orientations to simulate real-world scenarios. ECA’s sensitivity in detecting small and subsurface defects is analyzed, along with precise defect sizing and positional information. Reliability and repeatability are investigated through repeated measurements. Furthermore, the article analyses the impact of various factors on the performance of ECA, including surface conditions, probe configurations, and inspection parameters. Comparative analysis is performed to assess the advantages and limitations of ECA in comparison to other conventional inspection methods. The findings of this study will contribute to a better understanding of the capabilities and limitations of ECA in detecting aircraft component defects. The results will aid in optimizing inspection strategies, enhancing the reliability of defect detection, and improving the overall maintenance practices in the aerospace industry.
</abstract>

Evaluation of Eddy Current Array Performance in Detecting Aircraft Component Defects

<abstract>
<title style='display:none'>ABSTRACT</title>
This study applies advanced computational fluid dynamics (CFD) simulations to enhance the safety of an aircraft’s fuel system by striving to minimize the risk of on-board fire hazards. Employing a detailed flow simulation model, this research assesses the efficacy of newly designed measures within a fuel system, designed for a modified radial engine on a test-bed AN 2 airplane. The model simulates internal airflow, droplet particle flow, the formation of Eulerian Wall Film, and the vaporization process from the fuel film within the enclosure of the aircraft’s equipment bay. By exploring both the original and modified geometries of this fuel system enclosure, the simulations provide insights into the flowpaths of leaking fuel, the spatial and temporal distribution of fuel vapor concentrations, and the overall effectiveness of design modifications aimed at rapid removal of hazardous substances. Structural improvements, including the addition of strategic ventilation inlets and outlets, are proposed based on the simulation results to ensure rapid dispersion of vapors and minimal residual fuel, effectively reducing the potential for vapor ignition. This study thus underscores the potential of precise CFD modelling in identifying risks and developing robust fire hazard mitigation strategies in aviation fuel systems.
</abstract>

Flow Simulation-Based Methodology for Reducing The Risk of Fuel Fire In An Aircraft’s Fuel System Enclosure

<abstract>
<title style='display:none'>ABSTRACT</title>
Monitoring corrosion in aircraft structures through nondestructive testing is crucial for maintaining long-term aircraft serviceability. Corrosion monitoring is particularly challenging when corrosion damage is situated on internal surfaces of multilayer aircraft structures. The eddy current method is one of the most promising techniques for detecting and measuring such subsurface corrosion damage without direct contact or disassembly. However, due to their low sensitivity traditional eddy current probes with coaxial coils are not well suited for detecting corrosion damages of the local type, such as pitting or corrosion pits, in multilayer aircraft structures. This study tested the use of low-frequency eddy current probes of the double-differential type, characterized by 8 and 10 mm operational diameters, in detecting and measuring hidden corrosion damages of this local type. Such corrosion damages were simulated by means of flat-bottomed drilled holes of differing diameters and depths (or different diameters and residual thicknesses of the inspected sheet in the damaged area). The signals from the eddy current probes were evaluated in the complex plane using a universal eddy current flaw detector. The correlations between the amplitude and phase of the eddy current signal and depth of location of the local corrosion damages were analyzed. Results indicate that it is possible to estimate the residual thickness of the skin in locally corroded areas by measuring the eddy current signal phase, independently of the local corrosion damage diameter (size), providing useful information for residual service life determination.
</abstract>

Detecting and Estimating Local Corrosion Damages in Long-Service Aircraft Structures by the Eddy Current Method with Double-Differential Probes

<abstract>
<title style='display:none'>Abstract</title>
The article presents a research conducted with the project: ‘Additive technology used in conduction with optical methods for rapid prototyping of 3D printed models’ [13]. In this article selected three different 3D printing technologies: Fused Deposition Modeling (FDM), Selective Laser Sintering (SLS) and Material Jetting (MJ). Each of them was tested paying special attention to accuracy and resolution of printed elements. Accuracy tests were conducted on the reference specimens which also showed material texture. These specimens were scanned to verified dimensional deviations of printing methods. Printing resolution was verified on a heat exchanger model which was characterized by complicated structure. The highest accuracy and printing resolution was noticed in the MJ technology, PolyJet method on the Objet Eden 260 VS printing machine and the SUP 707 water soluble support material.
</abstract>

The Accuracy and the Printing Resolution Comparison of Different 3D Printing Technologies

<abstract>
<title style='display:none'>Abstract</title>
Detonation is a promising combustion mode to improve engine performance, increase combustion efficiency, reduce emissions, and enhance thermal cycle efficiency. Over the last decade, significant progress has been made towards the applications of detonation mode in engines, such as standing detonation engine (SDE), Pulse detonation engine (PDE) and rotating detonation engine (RDE), and the understanding of the fundamental chemistry and physics processes in detonation engines via experimental and numerical studies. This article is to provide a comprehensive overview of the progress in the knowledge of rotating detonation engine from the different countries. New observations of injection, ignition, and geometry of combustor, pressure feedback, and combustion modes of RDE have been reported. These findings and advances have provided new opportunities in the development of rotating detonation for practical applications. Finally, we point out the current gaps in knowledge to indicate which areas future research should be directed at.
</abstract>

Review on the Rotating Detonation Engine and It’s Typical Problems

<abstract>
<title style='display:none'>Abstract</title>
Additive Manufacturing (AM) based on Selective Laser Sintering (SLS) and Selective Laser Melting (SLM) is relatively widely used to manufacture complex shape parts made from metallic alloys, ceramic and polymers. Although the SLM process has many advantages over the conventional machining, main disadvantages are the relatively poor surface quality and the occurrence of the material structure defect porosity.
The paper presents key problems directly related to the implementation of AM, and in particular the selection and optimization of process conditions. The first section examines the issues of dimensional accuracy, the second surface quality and porosity problem determining the mechanical properties of manufactured products.
</abstract>

Selected Problems of Additive Manufacturing Using SLS/SLM Processes

<abstract>
<title style='display:none'>Abstract</title>
Eddy current (EC) method is considered as most applicable for in-service detection of fatigue subsurface cracks initiated in aircraft multilayer structures near the rivet holes. At the same time, the successful solution of this problem is obstructed by additional noise created by defect-free rivets. All EC inspection techniques for the detection of subsurface cracks around the rivets can be classified into three main groups: 1) static mode – carried out by placing the EC probe concentrically on the rivet head; 2) rotational mode – when the EC probe is rotated around the rivet axle and 2) sliding mode – performed by the movement of EC probe along the rivet line or near it. All these approaches have some advantages and limitations. In this study, known EC techniques for the detection of cracks in multilayer aircraft structures are analyzed. New advanced EC techniques for the detection of fatigue cracks in internal layers of the riveted structures based on different types (ring, sliding, and rotational) probes are presented. The static EC method with developed low-height ring-type probe creates the possibility to detect cracks in the difficult of access areas. The possibility to estimate the length of detected cracks by a ring-type probe is shown. The proposed rotational remote field EC probe can detect as small as 1.0 mm long cracks under the button-head rivet and 2 mm thick upper skin with a high signal-to-noise ratio. Therefore, in many aircraft structures, fatigue cracks will be detected before a critical threshold achieved. New EC sliding techniques based on remote field and double differential probes were proposed for the rapid detection of cracks in internal layers of riveted aircraft structures. Remote-field EC probe for reliable detection of fatigue cracks in third and fourth layers of five-layer units was proposed. Another sliding technique based on a double differential EC probe gives the possibility to detect transverse cracks in the second layer without the rivet row area access. The main advantage of developed techniques is high inspection reliability due to the possibility to discriminate the signals created by cracks and defect-free rivets. Presented inspection procedures include the selective signal analysis in the complex plane diagram. Proposed EC inspection techniques were successfully implemented into the aircraft maintenance practice.
</abstract>

Detection of the Fatigue Cracks Initiated near the Rivet Holes by Eddy Current Inspection Techniques

<abstract>
<title style='display:none'>Abstract</title>
Aircraft, their assemblies, and units must provide high durability and reliability, and maintain mechanical and technological characteristics throughout the life span of the aircraft. Different elements of aircraft structures work under mechanical loads, over a wide temperature range, with varying degrees of exposure to corrosive environments. Aircraft structural materials have a variation in the characteristics values and require the various testing methods for their inspection.
In many NDT methods applied in aviation materials testing, signals that could be represented by a narrowband processes model are used. Known methods of their processing are focused on determining and analyzing the signals amplitude characteristics, but the information resource contained in phase characteristics is not used.
In the article, the methodology for signal processing and determining phase characteristics in the time domain are discussed. It is based on the combination of the discrete Hilbert transform and the deterministic and statistical methods of the phase measurement. There are given examples of the application of the methodology for pulsed eddy current testing of electrically conductive materials and products, ultrasonic thickness measurement of products made of materials have significant ultrasonic attenuation, the realization impulse variant of acoustic impedance flaw detection of products made of composite materials. The examples have shown that the proposed signal processing methodology enables to determine new information parameters and signal characteristics for the industry, and extend the scope of known NDT methods.
</abstract>

Advanced Signal Processing Methods for Inspection of Aircraft Structural Materials

<abstract>
<title style='display:none'>Abstract</title>
Well-timed detection of the defects (e.g., fatigue cracks and corrosive damages) in aircraft structures is the question of vital importance. Periodic in-service non-destructive inspection (NDI) is necessary to prevent expensive aircraft breakdowns during in-service life. Eddy current (EC) NDI method have many advantages for in-service aircraft inspection due to high mobility and the possibility to detect fatigue cracks without direct contact with the inspected surface (even through a protective coating without removal). Last decades some enhanced EC techniques were developed for aircraft in-service inspection in the Karpenko Physico-Mechanical Institute of National Academy of Sciences (Lviv) in collaboration with Ukrainian and foreign aircraft companies.
Proposed earlier EC efficiency coefficient was applied for the selection of the ferrite-core EC probe parameters. Investigations concerned with the crack detectability for single-coil EC probes of different sizes were carried out to improve the inspection procedures. The sensitivity of the developed single-coil EC probe was experimentally investigated. The possibility to distinguish the signals associated with detected defect and lift-off was shown. The new inspection procedure was proposed for full suppression of the noise concerned with the rivet edge influence.
The high-frequency EC flaw detector of Leotest VD 3.03 type based on self-generator mode and miniature single-coil EC probes application was developed for detection of the surface-breaking fatigue cracks. The original scheme of double-circuit self-generator with intermittent oscillations was invented and investigated. The pulse-repetition frequency of high-frequency oscillations was used as an informative parameter. The important feature of the developed self-generating scheme is the effective suppression of the lift-off influence (the changes of the clearance between the EC probe and the inspected object surface during the scanning).
Developed EC flaw detectors of Leotest VD 3.03 type and inspection procedures were successfully implemented into the maintenance practice for detection of the fatigue cracks initiated in the wing and the fuselage structures and aviation engines in many companies such as ANTONOV AIRCRAFT, Lviv State Aircraft Repair Plant, Konotop aircraft repair plant «AVIAKON», Ukrainian International Airlines, MOTOR-SICH, State Enterprise “IVCHENKO-PROGRESS”, etc.
</abstract>

Enhanced Eddy Current Techniques for Detection of Surface-Breaking Cracks in Aircraft Structures

Ethical Publishing

Publishing Regulations

Transactions on Aerospace Research

Eddy Current Techniques for Detecting Hidden Subsurface Defects in Multilayer Aircraft Structures

Preliminary Design Analysis of Regenerative Cooling for N₂O/Alcohol Small Scale Liquid Rocket Engine

Green Propulsion Research at TNO the Netherlands

A Comparison of Helicopter Main Rotor Features Due to Stiffness of Rotor Blade-Hub Connection

A Systematic Review of Ground-Based Infrastructure for the Innovative Urban Air Mobility

Review of Testing Methods Dedicated for Sandwich Structures with Honeycomb Core