1. bookVolume 26 (2019): Edition 4 (December 2019)
Détails du magazine
License
Format
Magazine
eISSN
2354-0133
Première parution
20 Dec 2019
Périodicité
4 fois par an
Langues
Anglais
Accès libre

Effect of the Recyclate on a Deflection of Composites in Bending

Publié en ligne: 24 Apr 2020
Volume & Edition: Volume 26 (2019) - Edition 4 (December 2019)
Pages: 197 - 203
Reçu: 27 Aug 2019
Accepté: 20 Dec 2019
Détails du magazine
License
Format
Magazine
eISSN
2354-0133
Première parution
20 Dec 2019
Périodicité
4 fois par an
Langues
Anglais

[1] Ary Subagia, I., Kim, Y., Tijing, L., Kim, C., Shon, H., Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers, Composites Part B: Engineering, Vol. 58, pp. 251- 258, 2014.10.1016/j.compositesb.2013.10.027Search in Google Scholar

[2] Azzam, A., Li, W., An experimental investigation on the three-point bending behaviour of composite laminate, IOP Conf. Ser.: Mater. Sci. Eng., Vol. 62, pp. 1-8, 2014.10.1088/1757-899X/62/1/012016Search in Google Scholar

[3] Azzam, A., Li, W., Experimental investigation on the impact behaviour of composite laminate, Fibres & Textiles in Eastern Europe, Vol. 109, No. 1, pp. 77-84, 2015.Search in Google Scholar

[4] Belingardi, G., Cavatorta, M., Bending fatigue stiffness and strength degradation in carbon– glass/epoxy hybrid laminates: Cross-ply vs. angle-ply specimens, International Journal of Fatigue, Vol. 28, No. 8, pp. 815-825, 2006.10.1016/j.ijfatigue.2005.11.009Search in Google Scholar

[5] Carbajal, N., Mujika, F., Determination of longitudinal compressive strength of long fibre composites by three-point bending of [0m/90n/0p] cross-ply laminated strips, Polymer Testing, Vol. 28, No. 6, pp. 618-626, 2009.10.1016/j.polymertesting.2009.05.005Search in Google Scholar

[6] De Baere, I., Van Paepegem, W., Degrieck, J., Comparison of different setups for fatigue testing of thin composite laminates in bending, International Journal of Fatigue, Vol. 31, pp. 1095-1101, 2009.Search in Google Scholar

[7] Hajdukiewicz, G., Panasiuk, K., Kyzioł, L., Resistance to aging research in sea water composites with the polyester-glass recyclate, Journal of KONES Powertrain and Transport, Vol. 25, No. 3, pp. 219-225, 2018.Search in Google Scholar

[8] Kyzioł, L., Panasiuk, K., Hajdukiewicz, G., The influence of granulation and content of polyester- glass waste on properties of composites, Journal of KONES Powertrain and Transport, Vol. 25, No. 4, pp. 223-229, 2018.Search in Google Scholar

[9] Nunes, J., Pouzada, A., Bernardo, C., The use of a three-point support flexural test to predict the stiffness of anisotropic composite plates in bending, Polymer Testing, Vol. 21, pp. 27-33, 2002.10.1016/S0142-9418(01)00040-XSearch in Google Scholar

[10] Ochelski, S., Metody doświadczalne mechaniki kompozytów konstrukcyjnych, Wydawnictwa Naukowo-Techniczne, Warszawa 2018.Search in Google Scholar

[11] Panasiuk, K., Hajdukiewicz, G., Production of composites with added waste polyester-glass with their initial mechanical properties, Scientific Journals of the Maritime University of Szczecin, Vol. 124, No. 52, pp. 30-36, 2017.Search in Google Scholar

[12] Panasiuk, K., Hajdukiewicz, G., Influence of the content of a glass-polyester recycled additive on the properties of layered composites in dynamic tests, Scientific Journals of the Maritime University of Szczecin, Vol. 128, No. 56, pp. 36-40, 2018.Search in Google Scholar

[13] Panasiuk, K., Kyzioł, L., Hajdukiewicz, G., Analysis of the cracking process of layered composites with polyester-glass recyclate using dynamic tests, Scientific Journals of the Maritime University of Szczecin, Vol. 129, No. 57, pp. 73-78, 2019.Search in Google Scholar

[14] PN-EN ISO 14125:2001P, Kompozyty tworzywowe wzmocnione włóknami – Oznaczanie właściwości przy zginaniu, PKN, 2001.Search in Google Scholar

[15] Shen, Q., Omar, M., Dongri, S., Ultrasonic NDE Techniques for impact damage inspection on CFRP laminates, Journal of Materials Science Research, No. 1, 2012.10.5539/jmsr.v1n1p2Search in Google Scholar

[16] Suwak, R., Rawluk, M., Zastosowanie trójpunktowego zginania do badania przebiegu odkształcenia betonu ogniotrwałego w wysokiej temperaturze, Prace Instytutu Ceramiki i Materiałów Budowlanych, Vol. 3, No. 6, pp. 90-103, 2010.Search in Google Scholar

Articles recommandés par Trend MD

Planifiez votre conférence à distance avec Sciendo