1. bookVolume 26 (2019): Edition 4 (December 2019)
Détails du magazine
License
Format
Magazine
eISSN
2354-0133
Première parution
20 Dec 2019
Périodicité
4 fois par an
Langues
Anglais
Accès libre

The Influence of Cutting Parameters on Surface Topography During Turning Marine Pump Shafts

Publié en ligne: 24 Apr 2020
Volume & Edition: Volume 26 (2019) - Edition 4 (December 2019)
Pages: 141 - 148
Accepté: 21 Nov 2019
Détails du magazine
License
Format
Magazine
eISSN
2354-0133
Première parution
20 Dec 2019
Périodicité
4 fois par an
Langues
Anglais

[1] Agustina, B., Bernal, C., Camacho, A. M., Rubio, E. M., Experimental analysis of the cutting forces obtained in dry turning processes of UNS A97075 aluminium alloys, The Manufacturing Engineering Society International Conference, MESIC, Procedia Engineering, 63, pp. 694-699, 2013.10.1016/j.proeng.2013.08.248Search in Google Scholar

[2] Bensouilah, H., Aouici, H., Meddour, I., Yallese, M. A., Mabrouki, T., Girardin, F., Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement, Elsevier, 2015.10.1016/j.measurement.2015.11.042Search in Google Scholar

[3] Dudzik, K., The influence of welding parameters on the quality of joints made by FSW of AW-5083 aluminium alloy, In METAL 2016: 25th Anniversary International Conference on Metallurgy and Materials, pp. 694-699, Tanger, Ostrava 2016.Search in Google Scholar

[4] Dyl, T., Starosta, R., Określenie wpływu geometrii i rodzaju materiału płytek skrawających na topografię toczonych powłok kompozytowych, Inżynieria Materiałowa, Nr 6, pp. 701-704, 2012.Search in Google Scholar

[5] Dyl, T., Starosta, R., Wpływ geometrii i gatunku płytek skrawających na strukturę geometryczną toczonych powłok stopowych, Inżynieria Materiałowa, Nr 4, pp. 395-398, 2011.Search in Google Scholar

[6] Labuda, W., Khudoley, A., The influence of burnishing process on surface roughness of stainless steel researched by optical profiler, In METAL 2016: 25th Anniversary International Conference on Metallurgy and Materials, pp. 765-770, Tanger, Ostrava 2016.Search in Google Scholar

[7] Labuda, W., The influence of changing of cutting parameters on temperature and cutting forces during turning process by CCET09T302R-MF insert, Journal of KONES Powertrain and Transport, Vol. 25, No. 1, pp. 249-256, 2018.Search in Google Scholar

[8] Labuda, W., The influence of changing the side angle of the cutting tool by Wiper technology on the value of material ratio parameters of steel applied to marine pump shaft pins, Journal of KONES Powertrain and Transport, Vol. 22, No. 2, pp. 139-147, 2015.10.5604/12314005.1165420Search in Google Scholar

[9] Labuda, W., The influence of cutting inserts geometric on surface roughness of steel applied to sea water pump shafts, Journal of KONES Powertrain and Transport, Vol. 22, No. 3, pp. 133-140, 2015.Search in Google Scholar

[10] Labuda, W., The analysis of cutting tool geometric on cutting forces and surface roughness of steel applied to marine pumps shaft pins, Journal of KONES Powertrain and Transport, Vol. 21, No. 1, pp. 147-152, 2014.10.5604/12314005.1134064Search in Google Scholar

[11] Magri, A., Diniz, A. E., Suyama, D. I., Evaluating the use of high-pressure coolant in turning process of Inconel 625 nickel-based alloy, Proceedings of the institution of mechanical engineers part B-journal of engineering manufacture, Vol. 232, pp. 1182-1192, 2018.Search in Google Scholar

[12] Sadilek, M., Dubsky, J., Sadilkova, Z., Poruba, Z., Cutting forces during turning with variable depth of cut, Perspectives in Science, Elsevier, 2015.10.1016/j.pisc.2015.11.055Search in Google Scholar

[13] Starosta, R., Dyl, T., Obróbka wykańczająca natryskiwanych płomieniowo powłok Ni-Al. Ocena zużycia borazonowych płytek skrawających, Tribologia, Teoria i Praktyka, Nr 4, pp. 245-252, 2011.Search in Google Scholar

Articles recommandés par Trend MD

Planifiez votre conférence à distance avec Sciendo