Crack Assessment of a Very Thick and Bloc-Like Concrete Member

ACI 116R (2000)Cement and Concrete Terminology. ACI Committee 116, American Concrete Institute, Farmington Hills, USA.Search in Google Scholar

Bažant, Z.P. – Wu, S. T. (1973)Dirichlet Series Creep Function for Aging Concrete. Proceedings of the American Society of Civil Engineers, pp. 367-387, Reston (Virginia), USA.10.1061/JMCEA3.0001741Search in Google Scholar

Freiesleben, H. – Hansen, P. – Pedersen, E. J. (1977)Måleinstrument til Kontrol af betons hærding (Measuring Instrument for Control of Concrete Cure). Nordisk Beton, No. 1, pp. 21-25, Stockholm, Sweden [in Swedish].Search in Google Scholar

Heinrich, P. J. – Schlicke, D. (2014)Normative Regelungen zur unbewehrten Ausführung von massigen Betonbauteilen (Design specifications for the construction of unreinforced concrete members). Proceedings of 2^nd Grazer Betonkolloquium, Graz, University of Technology, Austria [in German].Search in Google Scholar

Heinrich, P. J. – Schlicke, D. (2016)Hardening induced stresses in very thick concrete members – insights from comprehensive FE-studies. Proceedings of the International RILEM Conference MSSCE 2016, Segment of Service Life of Cement-Based Materials and Structures Vol. 1, pp. 249-258, Copenhagen, Denmark.Search in Google Scholar

Heinrich, P. J. (in press, 2018)Effiziente Berechnung viskoelastischer Spannungen in gezwängten Betonbauteilen (Efficient method for determining viscoelastic stresses in restraint concrete members), Graz, University of Technology, Austria [in German].Search in Google Scholar

Jędrzejewska, A. – Bebodjema, F. – Lacarrière, L. – Azenha, M. – Schlicke, D. – Dal Pont, S. – Delaplace, A. – Granja, J. – Hájková, K. – Heinrich, P.J. – Sciumè, G. – Strieder, E. – Stierschneider, E. – Šmilauer, V. – Troyan, V. (2018)COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage. Construction and Building Materials, Vol. 174, pp. 173-189, doi: 10.1016/j.conbuildmat.2018.04.08810.1016/j.conbuildmat.2018.04.088Abierto DOISearch in Google Scholar

Jirásek, M. – Havlásek, P. (2014)Accurate approximations of concrete creep compliance functions based on continuous retardation spectra. Computers & Structures, Vol. 135, pp. 155-168, doi: 10.1016/j.compstruc.2014.01.02410.1016/j.compstruc.2014.01.024Abierto DOISearch in Google Scholar

Jonasson, J. E. (1984)Slipform construction – calculation for assessing protection against early freezing. Swedish Cement and Concrete Research Institute, Fo/Research, Stockholm, Sweden.Search in Google Scholar

ÖNORM EN 1992-1-1 (2011)Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings. Österreichisches Normungsinstitut, Vienna, Austria.Search in Google Scholar

Schlicke, D. (2014)Mindestbewehrung zwangbeanspruchter Betonbauteile unter Berücksichtigung der erhärtungsbedingten Spannungsgeschichte und der Bauteilgeometrie (Minimum reinforcement of restraint concrete members considering the hydration-caused stress-history and geometry). Graz, University of Technology, Austria, doi: 10.3217/978-3-85125-363-4 [in German].10.3217/978-3-85125-363-4[]Abierto DOISearch in Google Scholar

Schlicke, D. – Tue, N. V. (2015)Minimum reinforcement for crack width control in restrained concrete members considering the deformation compatibility. Structural Concrete, Vol. 16, doi: 10.1002/suco.20140005810.1002/suco.201400058Abierto DOISearch in Google Scholar

Wesche, K. (1993)Baustoffe für tragende Bauteile – Band 2: Beton, Mauerwerk (nicht-metallische-anorganische Stoffe) (Building materials for structural members – Part 2: Concrete, Masonry (non-metallic-inorganic materials)). Bauverlag GmbH Wiesbaden und Berlin, 3. Ed., Berlin, Germany [in German].Search in Google Scholar

ZTV-W215 (2012)Zusätzliche Technische Vertragsbedingungen Wasserbau (ZTV-W) für Wasserbauwerke aus Beton und Stahlbeton (Leistungsbereich 215) (Additional technical conditions of contract in civil engineering hydraulics for hydraulic structures from concrete and reinforced concrete (work section 215)). Bundesministerium für Verkehr, Bau und Stadtentwicklung, Abteilung Wasserstraßen, Schifffahrt, Karlsruhe, Germany [in German].Search in Google Scholar

• Physical-Mechanical Properties of Waterproofing Materials Applied to Roofs in the Context of UV Degradation
• The Pressure Resistance of Odor Traps for Sanitary Appliances and their Impact on the Hygiene of an Indoor Environment
• Detection of Changes in Evapotranspiration on a Catchment Scale Under Changing Climate Conditions in Selected River Basins of Slovakia
• Redesign of an Intake Fish Pass Structure
• Comparative Study of Lightweight Concretes Based on Hemp and Flax Straw
• The Potential and Implications of Automated Pre-Processing of LiDAR-Based Digital Elevation Models for Large-Scale Archaeological Landscape Analysis
• The Compaction of Energy and Properties of Roller-Compacted Concrete Pavement with Fillers
• The Effectiveness of the Implementation of Research Results in a Technological Scheme of Water Purification