An Investigation On Air and Thermal Transmission Through Knitted Fabric Structures Using the Taguchi Method

[1] Skenderi, Z., Cubric, I. S., Srdjak, M., (2009). Water Vapour Resistance of Knitted Fabrics under Different Environmental Conditions. Fibres & Textiles in Eastern Europe, 17, 72-75.Search in Google Scholar

[2] Kotb, N. A., Salman, A. A., Ghazy, H. M., Abu El-Anain, E. H., (2011). Quality of Summer Knitted Fabrics Produced from Microfiber / Cotton Yarns. Journal of Basic and Applied Scientific Research, 1(12), 3416-3423.Search in Google Scholar

[3] Ramachandran, T., Manomani, G., Vigneswaran, C., (2010). Thermal behavior of ring - and compact - spun yarn single jersey, rib and interlock knitted fabrics. Indian Journal of Fibre & Textile Research, 35, 250-257.Search in Google Scholar

[4] Oglakcioglu, N., Marmarali, A., (2007). Thermal Comfort Properties of Some Knitted Structure. Fibres & Textiles in Eastern Europe, 15, 94-96.Search in Google Scholar

[5] Chidambaram, P., Govind, R., Venkataraman, K. C., (2011). The Effect of Loop Length and Yarn Linear Density on the Thermal Properties of Bamboo Knitted Fabric. Autex Research Journal, 11(4), 102-105.Search in Google Scholar

[6] Ogulata, R. T., Mavruz, S., (2010). Investigation of Porosity and Air Permeability Values of Plain Knitted Fabrics. Fibres and Textiles in Eastern Europe, 18, 71-75.Search in Google Scholar

[7] Onofrei, E., Rocha, A. M., Catarino, A., (2011). The Influence of Knitted Fabrics’ Structure on the Thermal and Moisture Management Properties. Journal of Engineered Fibres and Fabrics, 6(4), 10-22.10.1177/155892501100600403Search in Google Scholar

[8] Ramakrishnan, G., Dhurai, B., Mukhopadhyay, S., (2009). An Investigation into the Properties of Knitted Fabrics made from Viscose Microfibres. Journal of Textile and Apparel, Technology and Management, 6(1), 1-9.Search in Google Scholar

[9] Mavruz, S., Ogulata, R. T., (2010). Optimization of air permeability of interlock knitted fabrics using different experimental design. Proceedings on 7th International Conference, TEXSCI, Liberec, Czech Republic.Search in Google Scholar

[10] Fayala, F., Alibi, H., Benltoufa, S., Jemni, A., (2008). Neural Network for Predicting Thermal Conductivity of Knit Materials. Journal of Engineered Fibres and Fabrics, 3(4), 53-59.10.1177/155892500800300407Search in Google Scholar

[11] Mitra, A., Majumdar, A., Majumdar, P. K., Banerjee, D., (2013). Predicting thermal resistance of cotton fabrics by artificial neural network model. Experimental Thermal and Fluid Science, 50, 172-177.10.1016/j.expthermflusci.2013.06.006Search in Google Scholar

[12] Luo, X., Hou, W., Li, Y., Wang, Z., (2007). A fuzzy neural network model for predicting clothing thermal comfort. Computers and Mathematics with Applications, 53, 1840-1846.10.1016/j.camwa.2006.10.035Search in Google Scholar

[13] Cubric, I. S., Skenderi, Z., Bogdanic, A. M., Andrassy, M., (2012). Experimental study of thermal resistance of knitted fabrics. Experimental Thermal and Fluid Science, 38, 223-228.10.1016/j.expthermflusci.2011.12.010Search in Google Scholar

[14] Dias, T., Delkumburewatte, G. B., (2008). Changing Porosity of Knitted Structures by Changing Tightness. Fibers and Polymers, 9, 76-79.10.1007/s12221-008-0012-6Search in Google Scholar

[15] Hes, L., (1987). Thermal properties of nonwovens. Proceedings of Congress Index 87, Geneva.Search in Google Scholar

[16] Pac, M. J., Bueno, M. A., Renner, M., (2001). Warm cool feeling relative to tribological properties of fabrics. Textile Research Journal, 71, 806-812.10.1177/004051750107100910Search in Google Scholar

[17] Park, C. K., Ha, J. Y., (2005). A process for Optimization Sewing Conditions to Minimize Seam Pucker Using the Taguchi Method. Textile Research Journal, 75(3), 245-252.10.1177/004051750507500310Search in Google Scholar

[18] Singh, S., Shan, H. S., Kumar, P., (2005). Quality and Reliability Engineering Handbook, John Wiley & Sons.Search in Google Scholar

[19] Zeydan, M., (2008). Modelling the woven fabric strength using artificial neural network and Taguchi methodologies. International Journal of Clothing Science and Technology, 20, 104-118.10.1108/09556220810850487Search in Google Scholar

[20] Ross, P. J., (1996). Taguchi Techniques for Quality Engineering, McGraw-Hill International Editions.Search in Google Scholar

[21] Taguchi, G., Chowdhury, S., Wu, Y., (2005). Taguchi’s Quality Engineering Handbook, John Wiley & Sons.10.1002/9780470258354Search in Google Scholar

[22] Majumdar, A., Mukhopadhyay, S., Yadav, R., (2010). Thermal properties of knitted fabrics made from cotton and regenerated bamboo cellulosic fibres. International Journal of Thermal Sciences, 49, 2042-2048. 10.1016/j.ijthermalsci.2010.05.017Search in Google Scholar

• Automatic Identification Of Wrist Position In A Virtual Environment For Garment Design
• Pressure Evaluation Of Seamless Yoga Leggings Designed With Partition Structure
• Tensile Properties Analysis Of 3D Flat-Knitted Inlay Fabric Reinforced Composites Using Acoustic Emission
• From Raw To Finished Cotton—Characterization By Interface Phenomena
• A Study on the Woven Construction of Fabric Dyed With Natural Indigo Dye and Finishing for Applying to Product Design for Home Textile Products
• A Calculation Method for the Deformation Behavior of Warp-Knitted Fabric
• Nondestructive Test Technology Research for Yarn Linear Density Unevenness
• Blend Electrospinning of Poly(Ɛ-Caprolactone) and Poly(Ethylene Glycol-400) Nanofibers Loaded with Ibuprofen as a Potential Drug Delivery System for Wound Dressings
• Study On Structure And Anti-Uv Properties Of Sericin Cocoons
• Fit And Pressure Comfort Evaluation On A Virtual Prototype Of A Tight-Fit Cycling Shirt
• Developing Real Avatars for the Apparel Industry and Analysing Fabric Draping in the Virtual Domain
• Review on Fabrication and Application of Regenerated Bombyx Mori Silk Fibroin Materials
• The Effects of Sensory Marketing on Clothing-Buying Behavior
• Transport of Moisture in Car Seat Covers
• Review on 3D Fabrication at Nanoscale
• Investigation of the Performance of Cotton/Polyester Blend in Different Yarn Structures
• Design of Clothing with Encrypted Information of Lost Children Information Based on Chaotic System and DNA Theory
• Application of Spectral Analysis in Spinning Measurements
• Polyaniline Electrospun Composite Nanofibers Reinforced with Carbon Nanotubes
• Current Development and Future Prospects of Designing Sustainable Fashion
• Effect of Surface Modification of Himalayan Nettle Fiber and Characterization of the Morphology, Physical and Mechanical Properties
• Investigation of Actual Phenomena and Auxiliary Ultrasonic Welding Parameters on Seam Strength of PVC-Coated Hybrid Textiles
• Modeling Lean and Six Sigma Integration using Deep Learning: Applied to a Clothing Company
• Comparative Analysis of Structure and Properties of Stereoscopic Cocoon and Flat Cocoon
• Effect of Different Yarn Combinations on Auxetic Properties of Plied Yarns
• Analysis of Heat Transfer through a Protective Clothing Package
• Study on the Thermal and Impact Resistance Properties of Micro PA66/PU Synergistically Reinforced Multi-Layered Biaxial Weft Knitted Fabric Composites
• Fea-Based Structural Heat Transfer Characteristic of 3-D Orthogonal Woven Composite Subjected to the Non-Uniform Heat Load
• Comfort-Related Properies of Cotton Seersucker Fabrics
• Investigating textile-based electrodes for ECG monitoring in veterinary clinical practice
• Identification of metal threads from Croatian fabrics
• Automatic recognition of density and weave pattern of yarn-dyed fabric
• Non-planar 3D printed elements on textile substrate using a fused filament fabrication 3D printer
• Wearable design for occupational safety of Pb²⁺ water pollution monitoring based on fluorescent CDs
• Investigating the Effect of Recycled Cotton Included Fabrics on the Thermal Behaviour by Using a Female Thermal Manikin
• Investigation of surface geometry of seersucker woven fabrics
• Liquid moisture transport in stretched knitted fabrics
• Study on Process Optimization and Wetting Performance of Ultrasonic-Oxidized Wool Fiber
• Thermal Resistance of Gray Modal and Micromodal Socks
• Textronic Solutions Used for Premature Babies: A Review
• State of the art of presentation of clothing textiles in E-commerce with size matching issues
• Animal fiber recognition based on feature fusion of the maximum inter-class variance
• Tie-dyeing pattern fast-generation method based on deep-learning and digital-image-processing technology
• A review of textiles reflecting FIR produced by the human body
• Computer geometric modeling approach with filament assembly model for 2 × 1 and 3 × 1 twill woven fabric structures
• Single-sided Jacquard knit fabric development and seamless ski underwear zoning design based on body mapping sportswear
• Development of the Smart T-Shirt for Monitoring Thermal Status of Athletes
• Assessment and Semantic Categorization of Fabric Visual Texture Preferences
• Application of Coating Mixture Based on Silica Aerogel to Improve Thermal Protective Performance of Fabrics
• A Biomimetic Approach to Protective Glove Design: Inspirations from Nature and the Structural Limitations of Living Organisms
• Washing Characterization of Compression Socks
• Development of a Small, Covered Yarn Prototype
• Numerical Prediction of the Heat Transfer in Air Gap of Different Garment Models
• Archaeology and Virtual Simulation Restoration of Costumes in the Han Xizai Banquet Painting
• Modeling of Material Characteristics of Conventional Synthetic Fabrics