1. bookVolume 16 (2018): Issue 14 (April 2018)
Journal Details
License
Format
Journal
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
Copyright
© 2020 Sciendo

Compaction Behaviour Modelling of Metal-Ceramic Powder Mixtures. A Review

Published Online: 12 Jun 2018
Page range: 28 - 37
Journal Details
License
Format
Journal
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
Copyright
© 2020 Sciendo

Powder mixtures compaction behavior can be quantitatively expressed by densification equations that describe the relationship between densities - applied pressure during the compaction stages, using correction factors. The modelling of one phase (metal/ceramic) powders or two-phase metal-ceramic powder composites was studied by many researchers, using the most commonly compression equations (Balshin, Heckel, Cooper and Eaton, Kawakita and Lüdde) or relative new ones (Panelli - Ambrózio Filho, Castagnet-Falcão- Leal Neto, Ge Rong-de, Parilák and Dudrová, Gerdemann and Jablonski. Also, for a better understanding of the consolidation process by compressing powder blends and for better prediction of compaction behavior, it's necessary the modeling and simulation of the powder pressing process by computer numerical simulation. In this paper are presented the effect of ceramic particles additions in metallic matrix on the compressibility of composites made by P/M route, taking into account (a) the some of above mentioned powder compression equations and also (b) the compaction behavior modeling through finite element method (FEM) and discrete element modeling (DEM) or combined finite/ discrete element (FE/DE) method.

Keywords

[1] R. W. Heckel, A normalized density-pressure Curve for Powder Compaction Trans. Metall. Soc. AIME, 224 (1962). 1074.Search in Google Scholar

[2]. I. H. Moon ,K. H. Kim, , Relationship between compacting pressure, green density, and green strength of copper powder compacts Powder Met., 27( 2) (1984). 80-84.Search in Google Scholar

[3] T. Çomoğlu, An Overview of Compaction Equations J. Fac. Pharm, Ankara, 36 (2) (2007)123-133. Search in Google Scholar

[4] C. Cazotti, J.L.A. Oliveira, J.B. Fogagnolo, , Efeito da Adição de Partículas de Al2O3 sobre a Compressibilidade de Pós De Ligas De Alumínio, 17o Proceedings of CBECIMat, 15 -19 de November, Foz do Iguaçu, PR, Brasil (2006) 7452.Search in Google Scholar

[5] R. Panelli, Thesis, Coordinator Prof. Dr. Ambrosio Fillo, Production of AISI M2 + 10%Vol. NbC by Mechanical Alloying, Sao Paulo, 1999.Search in Google Scholar

[6] S. Mani, L.G. Tabil and S. Sokhansanj, Evaluation of compaction equations applied to four biomass species, Canadian Biosystems Engineering/Le génie des biosystèmes au Canada, 46(2004) 3.55-3.61.Search in Google Scholar

[7]Luciano José De Oliveira, Thesis, Processing and Characterization of the Fe-Cu-Diamond System for Diamond Wire Pearls Use (in Portugues), Univ. de Estadual do Norte Fluminense, 2005.Search in Google Scholar

[8] M. Castagnet, R. B. Falcão, R. M. Leal Neto, Compressibility Evaluation Of Mechanically Activated Niobium And Aluminum Powders Mixtures ,18º CBECiMat -, 24 a 28 de Novembro de 2008, Porto de Galinhas, PE, Brasil, 6785.Search in Google Scholar

[9] S.J. Gerdemann and P.D. Jablonski, Compaction of Titanium Powders, . Metall. Mater. Trans. A, 42A (2011).1325-1333.10.1007/s11661-010-0520-zOpen DOISearch in Google Scholar

[10] Ge Rong-de, A New Powder Compaction Equation, The International Journal of Powder Metallurgy, 27 (3) (1991).211-214.Search in Google Scholar

[11] L. Parilák, E. Dudrová, R. Bidulský, M. Kabátová, Quantification of Metal Powder Compressibility in Uniaxial Compaction, Metallurgy World Congress and Exhibition. Euro PM 2004. Vol. 1., Vienna, 17.-21.10.2004. Ed. H. Danninger, R. Ratzi, EPMA 2004, p. 593-598Search in Google Scholar

[12] H. Hafizpour, A. Simchi, S. Parvizi, Analysis of the compaction behavior of Al-SiC nanocomposites using linear and non-linear compaction equations, Advanced Powder Technology 21(3) (2010) 273.10.1016/j.apt.2009.12.003Open DOISearch in Google Scholar

[13] A. Miskova, E. Dudrova, H. Brunckova, M. Faberova, R. Bures, Compressibility of Fe/SiO2 Coated Composite Powders ,PM2010 World Congress - Fundamentals of Pressing, p. 39Search in Google Scholar

[14] R. Bureš, M.Fáberová, Evaluation of Compressibility of Micro-Composite Systems , PM2010 World Congress - Compaction Equipment, p.81Search in Google Scholar

[15]S. Sivasankaran, K. Sivaprasad, R. Narayanasamy, V. K. Iyer, Evaluation of compaction equations and prediction using adaptive neuro-fuzzy inference system on compressibility behavior of AA 6061 100− x-x wt.% TiO 2 nanocomposites prepared by mechanical alloying, Powder Technol. 209 (1) (2011).124.Search in Google Scholar

[16]. M. Moreno, C. G. Oliver, Densification of al powder and Al-Cu matrix composite (reinforced with 15% saffil short fibres) during axial cold compaction , Powder Technol. 206(3) (2011).297.Search in Google Scholar

[17] C. Machio, R. Machaka, T. Shabalala, H. K. Chikwanda, Analysis of the Cold Compaction Behaviour of TiH2-316L Nanocomposite Powder Blend Using Compaction Models, Materials Science Forum, 828-829 (2015).121.Search in Google Scholar

[18] C.A. Leon, G. Rodriguez-Ortiz, E.A. Aguilar-Reyes, Cold compaction of metal-ceramic powders in the preparation of copper base hybrid materials, Materials Science and Engineering A 526 (2009).106.- [19] C. Ghiţă, I.N. Popescu, Experimental research and modelling of compaction behaviour of Al based composite with SiC particles, Comp Mater Sci, 64 (2012) 136-140.Search in Google Scholar

[20] S.Sivasankaran, PhD Thesis, Coordinator Prof. Dr. R.Narayanasamy Study on Synthesis, Characterization and Workability behavior of nanocrystalline AA6061 alloy reinforced with TiO2 Composite prepared by Mechanical alloying, NIT,Tiruchirappalli.Search in Google Scholar

[21] R. Machaka and H. K. Chikwanda, An Experimental Evaluation of The Gerdemann-Jablonski Compaction Equation, Metall Mater Trans A, 46 (5) (2015).2194Search in Google Scholar

[22] I.N. Popescu, R. Vidu, Compaction of Metal - Ceramic Powder Mixtures. Part. 1, ARA Journal of Sciences, old ISSN 0896-1018, in press.Search in Google Scholar

[23] I.N. Popescu, R. Vidu, Compaction of Metal - Ceramic Powder Mixtures. Part. 2, ARA Journal of Sciences, old ISSN 0896-1018, in press.Search in Google Scholar

[24] Cardei Petru , Gageanu Iuliana, A Critical Analysis ofEmpirical Formulas Describing The Phenomenon of Compaction of the Powders, J. Modern Technology & Engineering, 2(1) (2017).1-20Search in Google Scholar

[25] P. Han, X. Z. An, Y. X. Zhang, Z. S. Zou, FEM Modeling on the Compaction oF Fe and Al Composite Powders, J. Min. Metall. Sect. B-Metall. 51 (2) B (2015) 163 - 171Search in Google Scholar

[26] Sinka, I.C. Modelling Powder Compaction, Kona-Powder and Particle 25 (2007) 4-22.10.14356/kona.2007005Open DOISearch in Google Scholar

[27] D. Poquillon, J. Lemaitre, et.al. , Cold compaction of iron powders-relations between powder morphology and mechanical properties Part I: Powder preparation and compaction, Powder Technology 126 (2002) 65- 74.Search in Google Scholar

[28] Rusanescu C.O , Jinescu C, Rusanescu M., Enescu M. C., Anghelina F. V., Stoian E. V. , Despa V., Mathematical Modelling of the Stress-Strain Curve for 31VMn12 Ecological Steel, Materiale Plastice 54 ( 3) (2017) 409-413.Search in Google Scholar

[29] Faruk Güner Ömer Necati Cora Hasan Sofuoğlu, Numerical modeling of cold powder compaction using multi particle and continuum media approaches, Powder Technology 271 (2015) 238-247.Search in Google Scholar

[30] C.L. Martin, D. Bouvard, Study of the cold compaction of composite powders by the discrete element method, Acta Materialia 51 (2003) 373-38610.1016/S1359-6454(02)00402-0Open DOISearch in Google Scholar

[31] Harthong, Barthelemy; Jerier, Jean-Francois; Richefeu, Vincent; et al. Contact impingement in packings of elasticplastic spheres, application to powder compaction, International Journal of Mechanical Sciences, 61 (1 ) (2012) 32-43Search in Google Scholar

[32] Harthong, Barthelemy; Imbault, Didier; Doremus, Pierre, The study of relations between loading history and yield surfaces in powder materials using discrete finite element simulations Journal of the Mechanics and Physics of Solids, 60 (4) 2012, 784-80110.1016/j.jmps.2011.11.009Open DOISearch in Google Scholar

[33] Jerier, J-F; Hathong, B.; Richefeu, V.; et al., Study of cold owder compaction by using the discrete element method, Conference: Symposium STPMF 2009, Montpellier, FRANCE, MAY 25-27, 2009, Powder Technology, 208 (2) SI, 537-541.Search in Google Scholar

[34] Fen Huang, Xizhong An; Yuxi Zhang et al., Multi-particle FEM simulation of 2D compaction on binary Al/SiC composite powders, 1st International Workshop on Computational Particle Technology Suzhou, Peoples R China, Powder Technology, 314 SI (2016) 39-48.Search in Google Scholar

[35] Goran Frenning, Compression mechanics of granule beds: A combined finite/discrete element study, Chemical Engineering, Science, 65 (8 ) (2010) 2464-2471. Search in Google Scholar

[36]Goran Frenning, An efficient finite/discrete element procedure for simulating compression of 3D particle assemblies, Computer Methods In Applied Mechanics And Engineering, 197 (49-50) (2008). 4266-4272.Search in Google Scholar

[37] DT Gethin, RS Ransing, RW Lewis, et al., Numerical comparison of a deformable discrete element model and an equivalent continuum analysis for the compaction of ductile porous material, COMPUTERS & STRUCTURES 79 ( 13) (2001). 1287-1294.Search in Google Scholar

[38] K. T. Kim, J. H. Cho, Cold Compaction of Composite Powders, J. Eng. Mater-T. Asme., 122 (2000) 119-128.Search in Google Scholar

[39] K. T. Kim, J. H. Cho, A densification model for mixed metal powder under cold compaction, Int. J. Mech. Sci., 43 (2001)2929-2946Search in Google Scholar

[40] A. Kadir Eksi et.al, Experimental and numerical studies of metallic powders subjected to cold isostatic pressing, International Journal of Materials Research 102 (5) (2011) 572.10.3139/146.110503Open DOISearch in Google Scholar

[41] Erik Olsson, PhD Thesis, Micromechanics of Powder Compaction, Royal Institute of Technology, Stockholm, 2015.Search in Google Scholar

[42] S. Shima, M. Oyane, Plasticity theory for porous metals, Int. J. Mech. Sci., 18 (1976) 285- 29110.1016/0020-7403(76)90030-8Open DOISearch in Google Scholar

[43] A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I-Yield Criteria and Flow Rules for Porous Ductile Media, ASME J. Eng. Mater. Technol., 99 (1977) 2-15.Search in Google Scholar

[44] M. F. Moreno, C. J. R. González Oliver, Densification of Al powder and Al-Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction, Powder. Technol., 206 (2011) 297-305.Search in Google Scholar

[44] A. K. Eksi, A. H. Yuzbasioglu, Effect of sintering and pressing parameters on the densification of cold isostatically pressed Al and Fe powders,.Mater. Design, 28(4) (2007) 1364..10.1016/j.matdes.2006.01.018Open DOISearch in Google Scholar

[45]W. Wu, G. t. al., Experimental and numerical investigation of idealized consolidation: Part 1:Static compaction, Acta Mater., 48 (2000) 4323-4330.Search in Google Scholar

[46] D. Gethin, A.K. Arin, D.V. Tran, R.W Lewis, , Compaction and Ejection of Green Powder Compacts, Powder Metallurgy, 37(1) (1994) 42-54.10.1179/pom.1994.37.1.42Open DOISearch in Google Scholar

[47] T. Sheppard, H.B.McShane, Strength of Cold-Pressed Compacts , Powder Metallurgy, 23 (3).(1980) 120-124.10.1179/pom.1980.23.3.120Open DOISearch in Google Scholar

[48] F. Fischmeister, HE. Arzt, Powder Metallurgy, Densifcation of Powders by Particle Deformation, 26(2) (1983) 82-88.10.1179/pom.1983.26.2.82Open DOISearch in Google Scholar

[49] I.N. Popescu, S. Zamfir, F. V.Anghelina, C.O. Rusǎnescu, Fabrication through P/M of ecological aluminum based composite materials. Part 1-Characterization and densification of mixture powders, Proceedings of the 2nd Int. Conference on MEQAPS, Constantza, Sep 03,- 05(2010) 200-205.Search in Google Scholar

[50] Amir R. Khoei, Computational Plasticity in Powder Forming Processes, Elsevier Publisher, 2005.Search in Google Scholar

Plan your remote conference with Sciendo