Optimum Drafting Conditions Of Polyester And Viscose Blend Yarns

[1] Klein, W. (1987). Short Staple Spinning Series (Manual of Textile Technology), Vole 4, A Practical Guide to Ring Spinning, The Textile Institute, UK (Manchester).Search in Google Scholar

[2] Grishin P.F. (1945). A Theory of Drafting and Its Practical Application. Journal of Textile Institute, 45, 167-267.Search in Google Scholar

[3] Martindale, J.G. (1947). An instrument for measurement of the forces operating between fibers during drafting. Journal of Textile Institute, 38, 151-166.10.1080/19447024708659303Search in Google Scholar

[4] Roder, H. L. (1958). The Evaluation of the Spinning Properties of Man-made Staple fibers. Textile Research Journal, 28, 819-839.10.1177/004051755802801001Search in Google Scholar

[5] Audivert, R. (1974). The Relation between the Drafting Force, Draft, and Setting in the roller-drafting of staple-fiber slivers. Journal of Textile Institute, 65, 325-327.10.1080/00405007408630476Search in Google Scholar

[6] Su, C.I., Lo, K.J and Lee, J.Y. (1998). Drafting Force of Fine-Denier Polyester Fibers. Textile Research Journal, 68(8), 559-563.10.1177/004051759806800803Search in Google Scholar

[7] Su, C.I. and Lo, K.J. (2000). Optimum Drafting Conditions of Fine- Denier Polyester Spun Yarn. Textile Research Journal, 70(2), 93-97.10.1177/004051750007000201Search in Google Scholar

[8] Su, C.I., Liu, C.H and Jiang, J.Y. (2003). Drafting Force of Twin Spun yarn, Textile Research Journal, 73(9), 815-818.10.1177/004051750307300911Search in Google Scholar

[9] Su, C.I. and Jiang, J.Y. (2004). Fine Count Yarn Spun with a High Draft Ratio, Textile Research Journal, 74(2), 123-126.10.1177/004051750407400207Search in Google Scholar

[10] Su, C.I. and Lai, W.C. (2005). Optimum Drafting Conditions of Polypropylene Spun Yarns, Textile Research Journal, 75(1), 6-8.10.1177/004051750507500102Search in Google Scholar

[11] Su, C.I. and Fang, J.X. (2006). Optimum Drafting Conditions of Non-Circular Polyester and Cotton Blend Yarns, Textile Research Journal, 76(6), 441-447.10.1177/0040517506064254Search in Google Scholar

[12] Leaf, G. A. V. (1984). Practical Statistics for the Textile Industry, The Textile Institute, UK (Manchester).Search in Google Scholar

• Automatic Identification Of Wrist Position In A Virtual Environment For Garment Design
• Pressure Evaluation Of Seamless Yoga Leggings Designed With Partition Structure
• Tensile Properties Analysis Of 3D Flat-Knitted Inlay Fabric Reinforced Composites Using Acoustic Emission
• From Raw To Finished Cotton—Characterization By Interface Phenomena
• A Study on the Woven Construction of Fabric Dyed With Natural Indigo Dye and Finishing for Applying to Product Design for Home Textile Products
• A Calculation Method for the Deformation Behavior of Warp-Knitted Fabric
• Nondestructive Test Technology Research for Yarn Linear Density Unevenness
• Blend Electrospinning of Poly(Ɛ-Caprolactone) and Poly(Ethylene Glycol-400) Nanofibers Loaded with Ibuprofen as a Potential Drug Delivery System for Wound Dressings
• Study On Structure And Anti-Uv Properties Of Sericin Cocoons
• Fit And Pressure Comfort Evaluation On A Virtual Prototype Of A Tight-Fit Cycling Shirt
• Developing Real Avatars for the Apparel Industry and Analysing Fabric Draping in the Virtual Domain
• Review on Fabrication and Application of Regenerated Bombyx Mori Silk Fibroin Materials
• The Effects of Sensory Marketing on Clothing-Buying Behavior
• Transport of Moisture in Car Seat Covers
• Review on 3D Fabrication at Nanoscale
• Investigation of the Performance of Cotton/Polyester Blend in Different Yarn Structures
• Design of Clothing with Encrypted Information of Lost Children Information Based on Chaotic System and DNA Theory
• Application of Spectral Analysis in Spinning Measurements
• Polyaniline Electrospun Composite Nanofibers Reinforced with Carbon Nanotubes
• Current Development and Future Prospects of Designing Sustainable Fashion
• Effect of Surface Modification of Himalayan Nettle Fiber and Characterization of the Morphology, Physical and Mechanical Properties
• Investigation of Actual Phenomena and Auxiliary Ultrasonic Welding Parameters on Seam Strength of PVC-Coated Hybrid Textiles
• Modeling Lean and Six Sigma Integration using Deep Learning: Applied to a Clothing Company
• Comparative Analysis of Structure and Properties of Stereoscopic Cocoon and Flat Cocoon
• Effect of Different Yarn Combinations on Auxetic Properties of Plied Yarns
• Analysis of Heat Transfer through a Protective Clothing Package
• Study on the Thermal and Impact Resistance Properties of Micro PA66/PU Synergistically Reinforced Multi-Layered Biaxial Weft Knitted Fabric Composites
• Fea-Based Structural Heat Transfer Characteristic of 3-D Orthogonal Woven Composite Subjected to the Non-Uniform Heat Load
• Comfort-Related Properies of Cotton Seersucker Fabrics
• Investigating textile-based electrodes for ECG monitoring in veterinary clinical practice
• Identification of metal threads from Croatian fabrics
• Automatic recognition of density and weave pattern of yarn-dyed fabric
• Non-planar 3D printed elements on textile substrate using a fused filament fabrication 3D printer
• Wearable design for occupational safety of Pb²⁺ water pollution monitoring based on fluorescent CDs
• Investigating the Effect of Recycled Cotton Included Fabrics on the Thermal Behaviour by Using a Female Thermal Manikin
• Investigation of surface geometry of seersucker woven fabrics
• Liquid moisture transport in stretched knitted fabrics
• Study on Process Optimization and Wetting Performance of Ultrasonic-Oxidized Wool Fiber
• Thermal Resistance of Gray Modal and Micromodal Socks
• Textronic Solutions Used for Premature Babies: A Review
• State of the art of presentation of clothing textiles in E-commerce with size matching issues
• Animal fiber recognition based on feature fusion of the maximum inter-class variance
• Tie-dyeing pattern fast-generation method based on deep-learning and digital-image-processing technology
• A review of textiles reflecting FIR produced by the human body
• Computer geometric modeling approach with filament assembly model for 2 × 1 and 3 × 1 twill woven fabric structures
• Single-sided Jacquard knit fabric development and seamless ski underwear zoning design based on body mapping sportswear
• Development of the Smart T-Shirt for Monitoring Thermal Status of Athletes
• Assessment and Semantic Categorization of Fabric Visual Texture Preferences
• Application of Coating Mixture Based on Silica Aerogel to Improve Thermal Protective Performance of Fabrics
• A Biomimetic Approach to Protective Glove Design: Inspirations from Nature and the Structural Limitations of Living Organisms
• Washing Characterization of Compression Socks
• Development of a Small, Covered Yarn Prototype
• Numerical Prediction of the Heat Transfer in Air Gap of Different Garment Models
• Archaeology and Virtual Simulation Restoration of Costumes in the Han Xizai Banquet Painting
• Modeling of Material Characteristics of Conventional Synthetic Fabrics