Dye Removal From Textile Waste Water Through The Adsorption By Pumice Used In Stone Washing

[1] Wambuguh D. (2009). By-Product Synergy In The Textile Industry: Indigo Waste Recovery In The Denim Finishing Process. /PhD Thesis). The University of Texas at El Paso (USA)Search in Google Scholar

[2] Lin S. H., Chen M. L. (1997). Treatment of textile wastewater by chemical methods for reuse. Water Research, 31(4), 868-876.10.1016/S0043-1354(96)00318-1Search in Google Scholar

[3] O’Neill C., Hawkes F. R., Hawkes D. L., Lourenco N. D., Pinheiro H. M., Delee W. (1999). Colour in textile effluents – sources, measurement, discharge consents and simulation: a review. Journal of Chemical Technology and Biotechnology, 74(11), 1009-1018.10.1002/(SICI)1097-4660(199911)74:11<1009::AID-JCTB153>3.0.CO;2-NSearch in Google Scholar

[4] Veliev E. V., Öztürk T., Veli S., Fatullayev A. G. (2006). Application of Diffusion Modelfor Adsorption of Azo Reactive Dye on Pumic., Polish J. Environ. Stud., 15(2), 347-353.Search in Google Scholar

[5] Woerner D. L. Membrane technology in textile operations. 28/08/2014. http://cdam.minam.gob.pe/multimedia/contaminacion_industrial/PDF%20files/TextileMembrane.pdfSearch in Google Scholar

[6] Al-Qodah Z. (2000). Adsorption of dyes using shale oil ash. Water Research, 34(17), 4295-4303.10.1016/S0043-1354(00)00196-2Search in Google Scholar

[7] Puzyn T. and Mostrag-Szlichtyng A. (Ed.). (2012). Textile Organic Dyes - Characteristics, Polluting Effects and Separation/Elimination Procedures from Industrial Effluents - A Critical Overview, Organic Pollutants Ten Years After the Stockholm Convention - Environmental and Analytical Update, InTech, ISBN: 978-953-307-917-2Search in Google Scholar

[8] Sabbas T., Polettinib A., Pomi R., Astrup T., et. al. (2003). Management of municipal solid waste incineration residues. Waste Management, 23(1), 61-88.10.1016/S0956-053X(02)00161-7Search in Google Scholar

[9] Toraman Ö. Y., Topal H. (2003). Katı atık ve arıtma çamurlarının değerlendirilmesinde alternatif termal teknolojiler ve uygulamaları. J. Fac. Eng. Arch. Gazi Univ., 18(1), 19-33.Search in Google Scholar

[10] Sivrikaya O., Kıyıldı K. R., Karaca Z. (2014). Recycling waste from natural stone processing plants to stabilise clayey soil. Environmental Earth Science, 71(10), 4397-4407.10.1007/s12665-013-2833-xSearch in Google Scholar

[11] Annadurai G., Juang R. S., Lee D. J. (2002). Use of cellulose-based wastes for adsorption of dyes from aqueous solutions. J. Hazard. Mater., 92(3), 263-274.10.1016/S0304-3894(02)00017-1Search in Google Scholar

[12] Sepehr M. N., Zarrabi M., Kazemian H., Amrane A., Yaghmaian K., Ghaffari H. R. (2013). Removal of hardness agents, calcium and magnesium, by natural and alkaline modified pumice stones in single and binary systems. Applied Surface Science. 274(June), 295-305.10.1016/j.apsusc.2013.03.042Search in Google Scholar

[13] Mohan S. V., Rao N. C., Karthikayan J. (2002). Adsorptive removal of direct azo dye from aqueous phase onto coal based sorbents: a kinetic and mechanistic study. J. Hazard. Mater., 90(2), 189-204.10.1016/S0304-3894(01)00348-XSearch in Google Scholar

[14] Chu H. C., Chen K. M. (2002). Reuse of activated sludge biomass: I. Removal of basic dyes from wastewater by biomass. Process Biochemistry, 37(6), 595-600.Search in Google Scholar

[15] Harris R. G., Wells J. D., Johnson B. B. (2001). Selective adsorption of dyes and other organic molecules to kaolinite and oxide surfaces. Colloid and Surface A: Physicochemical and Engineering Aspects, 180(1-2), 131-140.10.1016/S0927-7757(00)00747-0Search in Google Scholar

[16] Bousher A., Shen X. D., R. Edyvan G. (1997). Removal of coloured organic matter by adsorption onto low-cost waste materials. Water Research, 31(8), 2084-2092.10.1016/S0043-1354(97)00037-7Search in Google Scholar

[17] Wu F. C., Tseng R. L., Juang R. S. (1999). Pore structure and adsorption performance of the activated carbons prepared from plum kernels. J. Hazard. Mater., 69(3), 287-302.10.1016/S0304-3894(99)00116-8Search in Google Scholar

[18] Chiou M. S., Li H. Y. (2003). Adsorption behavior of reactive dye in aqueous solution on chemical cross-linked chitosan beads. Chemosphere, 50(8), 1095-1105.10.1016/S0045-6535(02)00636-7Search in Google Scholar

[19] Özacar M., Şengil İ. A. (2003). Adsorption of reactive dyes on calcined alunite from aqueous solutions. J. Hazard. Mater., 98(1-3), 211-224.10.1016/S0304-3894(02)00358-8Search in Google Scholar

[20] Akbal F. (2005). Adsorption of basic dyes from aqueous solution onto pumice powder. Journal of Colloid and Interface Science, 286(2),455-458.10.1016/j.jcis.2005.01.03615897057Search in Google Scholar

[21] Akbal F. (2005). Sorption of phenol and 4-chlorophenol onto pumice treated with cationic surfactant. Journal of Environmental Management, 74(3), 239-244.10.1016/j.jenvman.2004.10.00115644263Search in Google Scholar

[22] Kitis M., Kaplan S. S., Karakaya E., Yiğit N. O., Civelekoğlu G. (2007). Adsorption of natural organic matter from waters by iron coated pumice. Chemosphere. 66(1), 130-138.10.1016/j.chemosphere.2006.05.00216784768Search in Google Scholar

[23] Wambuguh D., Chianelli R. R. (2008). Indigo dye waste recovery from blue denim textile effluent: a by-product synergy approach. New Journal of Chemistry, 32(12), 2189-2194.10.1039/b806213gSearch in Google Scholar

[24] Tunç S., Duman O. (2009). Effects of Electrolytes on the Electrokinetic Properties of Pumice Suspensions. Journal of Dispersion Science and Technology, 30(4),548-555.10.1080/01932690802553981Search in Google Scholar

• Automatic Identification Of Wrist Position In A Virtual Environment For Garment Design
• Pressure Evaluation Of Seamless Yoga Leggings Designed With Partition Structure
• Tensile Properties Analysis Of 3D Flat-Knitted Inlay Fabric Reinforced Composites Using Acoustic Emission
• From Raw To Finished Cotton—Characterization By Interface Phenomena
• A Study on the Woven Construction of Fabric Dyed With Natural Indigo Dye and Finishing for Applying to Product Design for Home Textile Products
• A Calculation Method for the Deformation Behavior of Warp-Knitted Fabric
• Nondestructive Test Technology Research for Yarn Linear Density Unevenness
• Blend Electrospinning of Poly(Ɛ-Caprolactone) and Poly(Ethylene Glycol-400) Nanofibers Loaded with Ibuprofen as a Potential Drug Delivery System for Wound Dressings
• Study On Structure And Anti-Uv Properties Of Sericin Cocoons
• Fit And Pressure Comfort Evaluation On A Virtual Prototype Of A Tight-Fit Cycling Shirt
• Developing Real Avatars for the Apparel Industry and Analysing Fabric Draping in the Virtual Domain
• Review on Fabrication and Application of Regenerated Bombyx Mori Silk Fibroin Materials
• The Effects of Sensory Marketing on Clothing-Buying Behavior
• Transport of Moisture in Car Seat Covers
• Review on 3D Fabrication at Nanoscale
• Investigation of the Performance of Cotton/Polyester Blend in Different Yarn Structures
• Design of Clothing with Encrypted Information of Lost Children Information Based on Chaotic System and DNA Theory
• Application of Spectral Analysis in Spinning Measurements
• Polyaniline Electrospun Composite Nanofibers Reinforced with Carbon Nanotubes
• Current Development and Future Prospects of Designing Sustainable Fashion
• Effect of Surface Modification of Himalayan Nettle Fiber and Characterization of the Morphology, Physical and Mechanical Properties
• Investigation of Actual Phenomena and Auxiliary Ultrasonic Welding Parameters on Seam Strength of PVC-Coated Hybrid Textiles
• Modeling Lean and Six Sigma Integration using Deep Learning: Applied to a Clothing Company
• Comparative Analysis of Structure and Properties of Stereoscopic Cocoon and Flat Cocoon
• Effect of Different Yarn Combinations on Auxetic Properties of Plied Yarns
• Analysis of Heat Transfer through a Protective Clothing Package
• Study on the Thermal and Impact Resistance Properties of Micro PA66/PU Synergistically Reinforced Multi-Layered Biaxial Weft Knitted Fabric Composites
• Fea-Based Structural Heat Transfer Characteristic of 3-D Orthogonal Woven Composite Subjected to the Non-Uniform Heat Load
• Comfort-Related Properies of Cotton Seersucker Fabrics
• Investigating textile-based electrodes for ECG monitoring in veterinary clinical practice
• Identification of metal threads from Croatian fabrics
• Automatic recognition of density and weave pattern of yarn-dyed fabric
• Non-planar 3D printed elements on textile substrate using a fused filament fabrication 3D printer
• Wearable design for occupational safety of Pb²⁺ water pollution monitoring based on fluorescent CDs
• Investigating the Effect of Recycled Cotton Included Fabrics on the Thermal Behaviour by Using a Female Thermal Manikin
• Investigation of surface geometry of seersucker woven fabrics
• Liquid moisture transport in stretched knitted fabrics
• Study on Process Optimization and Wetting Performance of Ultrasonic-Oxidized Wool Fiber
• Thermal Resistance of Gray Modal and Micromodal Socks
• Textronic Solutions Used for Premature Babies: A Review
• State of the art of presentation of clothing textiles in E-commerce with size matching issues
• Animal fiber recognition based on feature fusion of the maximum inter-class variance
• Tie-dyeing pattern fast-generation method based on deep-learning and digital-image-processing technology
• A review of textiles reflecting FIR produced by the human body
• Computer geometric modeling approach with filament assembly model for 2 × 1 and 3 × 1 twill woven fabric structures
• Single-sided Jacquard knit fabric development and seamless ski underwear zoning design based on body mapping sportswear
• Development of the Smart T-Shirt for Monitoring Thermal Status of Athletes
• Assessment and Semantic Categorization of Fabric Visual Texture Preferences
• Application of Coating Mixture Based on Silica Aerogel to Improve Thermal Protective Performance of Fabrics
• A Biomimetic Approach to Protective Glove Design: Inspirations from Nature and the Structural Limitations of Living Organisms
• Washing Characterization of Compression Socks
• Development of a Small, Covered Yarn Prototype
• Numerical Prediction of the Heat Transfer in Air Gap of Different Garment Models
• Archaeology and Virtual Simulation Restoration of Costumes in the Han Xizai Banquet Painting
• Modeling of Material Characteristics of Conventional Synthetic Fabrics